iPF760/iPF765 Firmware Version 1.07 (Firmware Update Tool Version 3.60) for Windows

    19-Sep-2013
    0400074102

    Download

    I have read and understood the disclaimer below
    and wish to download the designated software

    OS

    • Windows Server 2008
    • Windows Server 2003 R2
    • Windows Server 2003
    • Windows 8
    • Windows 7
    • Windows Vista
    • Windows XP
    • Windows 2000

    Outline

    You can use this program to update the printer firmware version.

    Update History

    Modifications from Ver.1.05 to Ver.1.07
    1. The specific period of time for auto cleaning execution has been modified.
    There could be a case that cleaning failure occurs on the color side when printing only with monochrome. To address this issue, the period of time for auto cleaning execution on the color side has been modified as follows.
    Before: Auto cleaning is executed within the specific period of time depending on the usage environment (temperature/humidity).
    After: Auto cleaning is executed on a regular basis.

    Modifications from Ver.1.00 to Ver.1.05
    1. Enhancement and improvement of HP-GL/2 function have been implemented. (iPF765)
    Following setting items have been added to the HP-GL/2 menu on the control panel.
    - [Over Size]: Function to print with setting margins
    - [Print Centered]: Function to print in the center of media
    - [Enlarge/Reduce]: Function to configure the scale factor (25%-400%)
    - [Line width correction]: Function to set correction value of line width
    (Target line width can be configured with [Pen Setup])
    - [Detect image size]: Function to analyze image data and detect image size
    Along with the addition of the setting items above, the function of
    [Page Size Process 1] and [Page Size Process 2] have been deleted.
    2. Fixed the failure that white line appears on the image under a certain condition.
    3. Fixed the failure that the printer does not recover normally when recovering from Sleep Mode.
    4. Fixed the problem that the community name setting in SNMP setting is not processed correctly.
    5. Maximum sleep timer setting has been changed. [240min] --> [210min]

    System requirements

    Use this program with the systems and the operating environments below.

    Software:
    Microsoft Windows 8 32-bit edition, English edition
    Microsoft Windows 7 32-bit edition, English edition
    Microsoft Windows Server 2008 32-bit edition, English edition
    Microsoft Windows Vista 32-bit edition, English edition
    Microsoft Windows Server 2003 R2 32-bit edition, English edition
    Microsoft Windows Server 2003 32-bit edition, English edition
    Microsoft Windows XP Professional / Home Edition 32-bit edition, English edition
    Microsoft Windows 2000 Professional /Server , English edition

    Hardware: Any computer running the software listed above.

    Interface Connectivity:
    The printer and computer where this program is executed must be connected
    with either of the following methods.

    - Connected via a TCP/IP network and capable of printing via the network.
    - Connected via a USB or IEEE 1394 port cable and capable of printing
    as a local printer.

    Note: If you are using IEEE1394, IEEE1394 Class Driver Ver2.0 or later is needed.

    Caution

    * You must log into Windows as an Administrator before the installation.
    * Before You start the firmware version update program, close any other applications that are running.
    * Do not try to use the printer while the firmware version update program is running. If a print job is executing, cancel the print job or wait for the job to finish before You execute the version update program.
    * Never switch off the target printer while the firmware version update program is running.
    * If the firmware version update fails while writing to the flash ROM, You may not be able to start the printer. In this case, contact a Canon service center or the dealer where You purchased the printer.

    Setup instruction

    (1) Switch the printer on.
    (2) Decompress it on your computer hard disk.
    (3) Execute the setup file. The imagePROGRAF Firmware Update Tool is installed.
    (4) From the Start menu, select Programs to execute imagePROGRAF Firmware Update Tool.

    File information

    1. File name : iPF760765-FUT-Win-0107.exe
    2. File version : 1.07
    3. File size : 18520KB

    Disclaimer

    All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.

    Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.

    Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).

    You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.

    You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.

    By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.