22-Jul-2013
0400090402
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.0.1.0 incorporates the following modifications:
1. The polarity of the XLR terminal has been modified to improve compatibility with external audio devices. The pin configuration has been modified to be consistent with the description in the Instruction Manual.
Firmware Version 1.0.1.0 is for XA10 camcorder with Firmware Version 1.0.0.0. If your camcorder's firmware is already Version 1.0.1.0, it is not necessary to update the firmware.
Once the camcorder is updated to the latest version, it cannot be restored to a previous version.
Preparations for the Firmware Update:
After the Firmware update has been performed, the camcorder's menu settings will be reset. It is recommended that users save their menu settings as settings data to an SD card, separate from the one that will be used to carry out the update, before starting update operations. This saved data can be loaded into the camcorder and the settings can be changed after the update has been completed. For further information on this, please refer to the section in the unit's Instruction Manual titled "Saving and Loading Menu Settings".
The downloaded folder contains the firmware (file name: VHE1.FIM / file size: 21,946,970 bytes), and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish and Simplified Chinese). Before starting the firmware update operations, please be sure to carefully confirm your understanding of these instructions.
The following items are required to perform this firmware update:
1. An XA10 camcorder body
2. A computer (OS: Mac OS X)
OS Requirements: Mac OS X (10.6-10.8)
3. A 32 MB or higher-capacity SD memory card or an SDHC memory card (both commercially available)
4. A card reader/writer (commercially available) or an SD card slot built into the computer
5. A fully charged battery pack for the camera
6. Compact power adapter bundled with the camera
7. The firmware (the downloaded file)
Q: What are the changes of Firmware Version 1.0.1.0?
A: The polarity of the XLR terminal has been modified to improve compatibility with external audio devices. The pin configuration has been modified to be consistent with the description in the Instruction Manual. Before the Firmware update, the pin configuration for the XLR jack was (pin1: shield, pin2: cold, pin3: hot). After the Firmware update, the pin configuration for the XLR jack will be (pin1: shield, pin2: hot, pin3: cold). The XLR pin configuration meets the international AES standard recommendation. The firmware update will avoid the scenario where use of the unit in combination with a device of different polarity than the XLR terminals would result in reduced sound levels due to a reversal of the phase relationship.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Singapore Pte. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.