Cleaning the Inside of the Printer

    10-Jan-2012
    8200862000

    Solution

      If the printed paper has smudge marks, clean the fixing roller using the following procedure.
      * A4 or Letter size plain paper is required to clean the fixing roller. Have A4 or Letter size plain paper ready.

      1. Load A4 or Letter size plain paper in the multi-purpose tray.
      For details on the procedures for loading paper, see "e-Manual" (HTML manual) in the CD-ROM supplied with the printer.

      2. Make sure that the printer is online (the Online indicator is on).
      If the Online indicator is off, press [ ] (Online).

      3. Press [ ] (Utility).

      4. Select [Cleaning] using [ ] and [ ], then press [OK].

      5. Select [A4] or [LTR] using [ ] and [ ], then press [OK].

      6. Select [Yes] using [ ], and then press [OK].
      <Set paper for cleaning page.> appears in the display.

      7. Press [ ] (Online).
      → The cleaning paper is printed.
      <Set cleaning paper and press the Online key.> appears in the display.

      8. If any paper is loaded in the multi-purpose tray, remove it.

      9. Load the cleaning page with the printed side facing up and the arrow mark going into the multi-purpose tray first.

      10. Press [ ] (Online).
      → The paper is fed into the printer slowly, and the printer starts cleaning the fixing roller.
      NOTE
      Cleaning time
      • It takes approximately 80 seconds.
      * Cleaning the fixing roller cannot be canceled. Please wait until it is completed.
      (The cleaning is finished when the paper is output completely.)
      The front or back of the printed paper has smudge marks even after performing the above procedure.
      • Perform the cleaning again. When doing so, do not use the cleaning paper output in Step 7 above but load A4/Letter size blank paper in the multi-purpose tray, and then perform the cleaning.