If the Message <LOAD CORRECT PAPER> Appears
13-Okt-2011
8200508600
Isu
The message <LOAD CORRECT PAPER> appears on the display and printing is interrupted.
Sebab dan Solusi
When <LOAD CORRECT PAPER> appears on the display, the size of the paper in the paper cassette or multi-purpose tray is different from that of the paper specified in <PAPER SIZE> for <CASSETTE 1>, <CASSETTE 2> (optional) or <MP TRAY>. You need to load the correct size paper or change the paper size in <PAPER SIZE> for <CASSETTE 1>, <CASSETTE 2> (optional) or <MP TRAY>.
NOTE
For print jobs, you need to specify the paper size from your computer.
1. Load the correct size paper as shown on the display, then press [OK] to resume the job.
For instructions on how to load paper into the Paper Cassettes, see "Loading Paper into the Paper Cassettes." For instructions on how to load paper into the Multi-Purpose tray, see "Loading Paper in the Multi-Purpose Tray." For instructions on how to set the paper size and type, see "Setting Paper Size and Type."- The machine re-starts printing.
Follow the procedure below to change the paper size setting.
For Copy Job1. Press
[Stop/Reset].2. Press
to select <YES>.
3. Press
[Paper Settings] repeatedly to select
<CASSETTE 1>, <CASSETTE 2> or <MP TRAY>, then press [OK].
<CASSETTE 2> is displayed only if the optional paper cassette is attached. If you select <MP TRAY>, press or 
to select <ON>, then press [OK].
4. Press
or to select the size of the paper loaded into the machine, then press [OK].
5. Press
or to select the type of the paper loaded into the machine, then press [OK].
6. Resume the copy job.
For Fax Job1. Press
[Paper Settings] repeatedly to select <CASSETTE 1>, <CASSETTE 2> or <MP TRAY>, then press [OK].
<CASSETTE 2> is displayed only if the optional paper cassette is attached. If you select <MP TRAY>, press or to select <ON>, then press [OK].
2. Press
or to select the size of the paper loaded into the machine, then press [OK].
3. Press
or to select the type of the paper loaded into the machine, then press [OK].
4. Open and close the paper cassette that you set in step1 to resume the fax job.
NOTE
For the multi-purpose tray, skip this step.
For Report/List Job1. Press
[Job Cancel/Status Monitor] repeatedly to select <REPORT STATUS>, then press [OK].
2. Press
or to select the job to cancel, then press [OK].
NOTE
The displayed job varies depending on the job that you select.
3. Press
or to select <CANCEL>, then press [OK].
4. Press
to select <YES>.
5. Press
[Stop/Reset] to return to the standby mode.6. Press
[Paper Settings] repeatedly to select <CASSETTE 1>, <CASSETTE 2> or <MP TRAY>, then press [OK].
<CASSETTE 2> is displayed only if the optional paper cassette is attached. If you select <MP TRAY>, press or to select <ON>, then press [OK].
7. Press
or to select the size of the paper loaded into the machine, then press [OK].
8. Press
or to select the type of the paper loaded into the machine, then press [OK].
9. Resume the report/list job.
For Print Job1. Press
[Job Cancel/Status Monitor] repeatedly to select <JOB CANCEL>, then press [OK].
2. Press
or to select <PRINT>, then press [OK].
3. Press
or to select the job to cancel, then press [OK].
NOTE
The displayed job varies depending on the job that you select.
4. Press
to select <YES>.
5. Press
[Stop/Reset] to return to the standby mode.6. Select [Output Size] on the printer driver to match the setting in the machine, then resume the print job.