How to set Continuous Shooting
01-Mar-2010
8200760500
Solusi
You can shoot continuously at a maximum speed of approximately 0.8 images/second while the <shutter button> is pressed fully and held. (When shooting continuously in [Low Light] (
)mode, the maximum speed is approximately 2.6 images/second)
)mode, the maximum speed is approximately 2.6 images/second)CAUTION
- The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
). - For continuous shooting, the focus and exposure are locked when the <shutter button> is pressed halfway.
- For a certain interval, images may not be recorded, and the shooting speed for may slow down depending on the shooting conditions and the camera settings.
- As the number of images increases, the shooting speed may slow down.
- If the flash fires, the shooting speed may slow down.
- In the following shooting modes, you cannot set the [Continuous Shooting] (
).
- [AUTO] (
), [Easy] (
), [Face Self-Timer] (
), [Movie] (
)
), [Easy] (), [Face Self-Timer] (), [Movie] ()1. Press the <Power> button on the camera.
2. Press the <FUNC./SET> (
) button.
) button.
3. The following screen appears on the LCD monitor.
Operate the <directional buttons> up or down to select 
the [Single Shot] (
).
the [Single Shot] ().Operate the <directional buttons> left or right to select 
the [Continuous Shooting] (
).
the [Continuous Shooting] ().Press the <FUNC./SET> () button.
) button.4. The following screen appears on the LCD monitor.
If the [Continuous Shooting] () icon is displayed on the upper-left part of the screen, the setting is completed.
) icon is displayed on the upper-left part of the screen, the setting is completed.As long as you hold the <shutter button> down, the camera will shoot successive images.
NOTE
- Continuous shooting speed increases in [Low Light] (). (Approx. 2.6 images/sec.)
- To set the shooting mode to [Low Light] (), follow the instructions below.
), follow the instructions below.1. Set the <Mode Dial> to [SCN] (
).
).2. Press the <FUNC./SET> () button.
) button. 3. <Operate the <directional buttons> up and down to select a [Shooting mode]. ([Face Self-Timer] () appears if settings have not been changed before.)
) appears if settings have not been changed before.)4. Operate the <directional buttons> left and right to select [Low Light] ().
).5. Press the <FUNC./SET> () button.
) button.