How to set Continuous Shooting (PowerShot ELPH 310 HS / IXUS 230 HS)

    20-Sep-2011
    8201272100

    Solusi

      You can shoot continuously at a maximum speed of approximately 3.5 images/second while the <shutter button> is pressed fully and held.
      IMPORTANT
      • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program] ().
      • Cannot be used with the self-timer.
      • Continuous shooting speed increases in [Low Light] () mode.
      • Depending on the shooting conditions, the camera settings and the zoom position, the camera may stop shooting momentarily, or the shooting speed may slow down.
      • As the number of images increases, the shooting speed may slow down.
      • If the flash fires, the shooting speed may slow down.
      • In the following shooting modes, you cannot set the [Continuous] ().
      - [AUTO] (), [Movie Digest] (), [Smart Shutter] (), [Handheld NightScene] (), [Long Shutter] (), [Stitch Assist] (), [iFrame Movie] (), [Super Slow Motion Movie] ()
      • The position and shape of the operation buttons, screens displayed, and setting items may differ according to the model you use.

      1. Press the <Power> button.


      2. Press the <FUNC./SET> () button.


      3. The following screen appears on the LCD monitor.



      Operate the <directional buttons> up or down to select the [Drive Mode] ().
      After the selection is made, press the <FUNC./SET> button ().


      4. The following screen appears on the LCD monitor.



      Operate the <directional buttons> up or down to select the [Continuous] ().
      After the selection is made, press the <FUNC./SET> button ().


      5. The following screen appears on the LCD monitor.



      If the [Continuous] () icon is displayed on the upper-left part of the screen, the setting is completed.
      As long as you hold the <shutter button> down, the camera will shoot successive images.