What are the error messages that appear on the LCD monitor?

    21-Mar-2013
    8201740900

    Solusi

      If an error message is displayed, respond as follows.
      Message displayed Solution
      No memory cardThe memory card may be inserted facing the wrong way. Reinsert the memory card facing the correct way.
      Memory card lockedThe SD memory card, SDHC memory card, SDXC memory card or Eye-Fi card’s write protect tab is set to "LOCK". Unlock the write protect tab.
      The [Memory card locked] message appears on the screen
      Cannot record!Shooting was attempted without a memory card in the camera. To shoot, insert a memory card facing the correct way.
      Memory card errorThe memory card may be malfunctioning. You may be able to solve this problem by formatting the memory card (low level formatting).
      Formatting a Memory Card

      If the same error message is displayed even after you have formatted a supported memory card and have inserted it facing the correct way, contact a Canon Customer Support Help Desk.
      Insufficient space on cardThere is not enough free space on the memory card to shoot or edit images. Either erase unneeded images or insert a memory card with enough free space.
      Change the battery packBattery charge is insufficient to operate the camera. Replace it at once with a charged one or recharge the battery.
      No Image.The memory card does not contain any images that can be displayed.
      Protected!The image is protected. Follow the procedures below to remove the protection.
      - () button, and then turn the power on. Touch the <> button> the [Playback]() tab > [Protect]> [Select] and then select the image for which you want to remove protection. Next, touch the () button to remove protection.
      Unidentified Image
      Incompatible JPEG
      Image too large.
      Cannot play back (MOV)
      Cannot play back (MP4)
      • Unsupported images, or images with corrupted data cannot be displayed.
      • It may not be possible to display images that were edited or renamed on a computer, or images shot with another camera.
      Cannot magnify!
      Cannot rotate
      Cannot modify image
      Cannot modify
      Cannot assign to category
      Unselectable image
      The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies.
      Magnify*, Rotate, Edit*, Print List*, and Photobook Set-up*.
      Exceeded selection limit Print List or Photobook Set-up settings could not be saved correctly. Reduce the number of selected images and try again.
      Communication errorAn excessive amount of images (approx. 1,000) on the memory card prevented printing or image transfer to a computer. To transfer the images, use a commercially available USB card reader. To print, insert the memory card directly into the printer card slot.
      Naming error!The folder could not be created or images could not be recorded, because the highest supported folder number (999) for storing images on the card has been reached and the highest supported image number (9999) for images in folders has been reached.
      Touch the <> button> [Settings] () tab and change [File Numbering] to [Auto Reset] or format the memory card.
      Formatting a Memory Card
      Lens Error• This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations.
      • Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk.
      A camera error was detected (error number)• If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image.
      • Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk.
      File ErrorCorrect printing may not be possible for photos from other cameras or images that have been altered using computer software, even if the camera is connected to the printer.
      Print errorCheck the paper size setting. If this error message is displayed when the setting is correct, restart the printer and complete the setting on the camera again.
      Ink absorber fullContact a Canon Customer Support Help Desk to request assistance with ink absorber replacement.