11-Nov-2020
0400400802
Saya telah membaca dan memahami disclaimer di bawah, dan ingin mengunduh perangkat lunak yang ditunjuk.
Firmware Version 1.3.8 incorporates the following improvements:
1. Increased the maximum number of characters that can be used for Administrator Password to 15.
2. Changed the factory default settings. Previous settings will be maintained after updating the firmware.
- [Administrator Password]
After update: Not registered
If you decide to upgrade to this firmware, refer to the readme file "Readme-E.txt", and use the firmware file listed below, as well as the latest Camera Management Tool.
The latest Camera Management Tool and its manual will need to be downloaded separately.
[Firmware file and tool]
- vbs30-31-800-900v138.bin
- CCMTInstall.exe Camera Management Tool
The firmware contains software modules developed by third parties. The details are available in the download: Readme-E.txt. The Third-party Software License (ThirdPartySoftware-E.pdf) and the license conditions are available in the OpenSource Folder which is inside the LICENSE folder.
Ver. 1.3.3
1. Improved network communication stability.
Ver. 1.3.2
1. Improves the reliability of communications when using RTSP with some of the VMSes.
2. Eliminates the potential for certain DHCP server settings to prevent the camera from retrieving network setting information.
3. Corrects an issue in which there is a delay in initiating HTTPS communications.
4. Corrects an issue in which recordings are truncated when used with specific VMSes.
Ver. 1.3.0
1. Support for Russian/Turkish Languages.
2. Added Haze Compensation function.
3. Support for Area Zoom/Drag to Move controls. (VB-S30D/VB-S31D)
4. Support for Viewer PTZ function as an addition to VB Viewer.
5. Added Log Notifications.
6. Enhanced the quality of the Smart Shade Control Auto Mode.
7. Decreased the data size by reducing the noise when recording in low light conditions.
8. Reduced the playback delay in H.264 mode.
9. Increased the number of camera positions registered to 64 in the preset. (VB-S30D/VB-S31D)
10. Presets can be set in the digital zoom areas. (VB-S30D/VB-S31D)
11. Added Pan/Tilt Speed Control menu options, allowing for the ability to ""Control by zoom position"". (VB-S30D/VB-S31D)
12. Added FTP Server menu options. The FTP server can now be set to ""Disable"".
13. ""Added a mode in [Encrypted Communications] that can be set to HTTP, HTTP and HTTPS, or HTTPS only.
14. Support for multicast DNS.
15. Support for SNMPv3.
16. Support for TLS1.1/TLS1.2. SSL3.0 is no longer supported.
17. Support for Group 5 and Group 14 in [DH Group] within [IPsec].
18. Revisions to the on-screen display terminology below.
Before update: ""Color of text outline"" => after update: ""Background color""
Before update: ""Color depth of text and outline"" => after update: ""Color depth of text and background""
19. The factory default settings have changed. However, settings made by the user prior to the update will stay the same.
- [Pan/Tilt Speed Control] in [Camera control] (VB-S30D/VB-S31D)
Before update: ""Control at set speed"" => after update: ""Control by zoom position""
- [Multicast TTL] in [Audio Multicast / RTP Streaming 1-5]
Before update: ""0"" => after update ""1""
- [Use FTP Server] in [FTP]:
Before update: ""Enable"" => after update: ""Disable""
20. Changed the listing order of the default Media Profile to increase the connectability with ONVIF.
Ver. 1.2.0
1. Added [Auto(Flickerless2)] to AE mode. Please use, when [Auto(Flickerless)] does not satisfactorily remove the flicker.
2. Added a setting menu that allows for the time check to be voided, during the WS-Security authentication.
3. H.264 algorithm improved, decreasing data size.
4. Improved the system, so that if there is an unforeseen power outage while recording to the memory card, the recording would automatically restart, when power is restored.
5. Increased security to limit improper PTZ control. (VB-S30D/VB-S31D)
Ver. 1.1.1
1. Transmission of data over networks that exhibit data latency has been improved, helping to increase frame rate delivery.
2. Improves the performance of HTTP distribution for RTP streams.
3. Improves connectivity when the network cameras are used with the recording systems of other manufacturers.
Ver. 1.1.0
1. Support for Windows 8.1 and Windows Server 2012 R2 operating systems has been added.
2. Support for Internet Explorer 11 has been added.
3. Added WebView support for up to two streams of H.264 over RTSP.
4. Real Time Streaming Protocol (RTSP) communications have been improved.
5. An RTP settings tab has been added to the camera's main settings page.
6. A new function for backing up all camera settings to the memory card has been added.
7. Implementation of minor bug fixes.
OS
- Windows Vista Ultimate/Business/Enterprise/Home Premium SP2 32/64-bit
- Windows 7 Ultimate/Professional/Enterprise/Home Premium SP1 32/64-bit
- Windows 8/Windows 8 Pro/Windows 8 Enterprise 32/64-bit
- Windows 8.1/Windows 8.1 Pro/Windows 8.1 Enterprise 32/64-bit
- Windows Server 2008 Standard SP2 32/64-bit
- Windows Server 2008 R2 Standard SP1 64-bit
- Windows Server 2012 Standard 64-bit
- Windows Server 2012 R2 Standard 64-bit
Web Browser
- Internet Explorer 8/9 32-bit
- Internet Explorer 10/11
- Be sure to change the administrator password from the factory default settings.
- After updating to this firmware, the Camera Management Tool Ver. 2.4.1 or older cannot be used.
- When restoring factory default settings after updating the firmware, it is required to set [Administrator Password]. Also set the camera registered information to the recorder, etc.
- After completing the firmware upgrade, use the software installer (AdminToolsCertificate.exe) included in this download to install the Admin Tools Certificate. The Admin Tools Certificate is a digital certificate needed for using Admin Viewer and Admin Tools.
- Please follow the steps below to install the Admin Tools Certificate.
1) Double-click AdminToolsCertificate.exe.
2) When the [User Account Control] dialog box appears, click [Yes] or [Continue].
3) A dialog box will appear, click [OK].
- After completing the firmware upgrade, you will not be able to use the Proxy Authentication Admin Tools included on the CD-ROM.
- The following tools will not be available, after upgrading the firmware.
Please download the latest Camera Management Tool instead:
1) VB Initial Setting Tool
2) Memory Card Unmount Tool
3) Backup Tool
4) Restore Tool
- After completing the firmware upgrade, the camera's time settings may have changed.
Reset the time on the settings page and reboot the camera.
- The functions provided by completing the upgrade are not listed in the manuals on the included CD-ROM.
Download the latest version separately.
1. Download the file to any folder.
2. Right-click the zip file, and then select Extract All to extract the file.
3. For further instructions, refer to Readme in the decompressed folder.
Semua perangkat lunak, program (termasuk namun tidak terbatas pada driver), file, dokumen, manual, instruksi, atau materi lainnya (secara bersama-sama disebut "Konten") tersedia di situs ini atas dasar "sebagaimana adanya".
Canon Singapore Pte. Ltd., dan perusahaan afiliasinya (“Canon”) tidak memberikan jaminan dalam bentuk apa pun sehubungan dengan Konten, secara tegas menyangkal semua jaminan, tersurat maupun tersirat (termasuk, tanpa batasan, jaminan tersirat tentang dapat diperjualbelikan, kesesuaian untuk tujuan tertentu dan non-pelanggaran) dan tidak bertanggung jawab untuk memperbarui, mengoreksi, atau memberikan dukungan Konten.
Canon memiliki semua hak milik, kepemilikan, dan hak kekayaan intelektual yang relevan dalam Konten. Anda dapat mengunduh dan menggunakan Konten hanya untuk penggunaan pribadi, non-komersial, dan dengan risiko Anda sendiri. Canon tidak bertanggung jawab atas kerusakan apa pun sehubungan dengan Konten, (termasuk, tidak terbatas untuk kerusakan tidak langsung, sebagian, ganti rugi atau kerusakan tidak disengaja).
Anda tidak boleh mendistribusikan, menetapkan, melisensikan, menjual, menyewakan, menyiarkan, mentransmisikan, menerbitkan, atau mentransfer Konten ke pihak lain mana pun. Anda juga tidak boleh (dan tidak akan membiarkan orang lain) mereproduksi, memodifikasi, memformat ulang, membongkar, mendekompilasi, atau merekayasa balik atau membuat karya turunan dari Konten, secara keseluruhan atau sebagian.
Anda setuju untuk tidak mengirim atau membawa Konten keluar dari negara/wilayah tempat Anda awalnya memperolehnya ke negara/wilayah lain tanpa izin yang diperlukan dari pemerintah yang berlaku dan/atau melanggar undang-undang, batasan, dan peraturan yang berlaku.
Dengan melanjutkan mengunduh Konten, Anda setuju untuk terikat oleh hal di atas serta semua hukum dan peraturan yang berlaku untuk pengunduhan dan penggunaan Konten oleh Anda.