Konsumen Bisnis
ENG BAHASA INDONESIA
Konsumen
Beralih ke: Bisnis
Dukungan
ENG BAHASA INDONESIA
  1. Dukungan
  2. Cari
  3. Unduh
Hubungi kami

    Firmware RC-IP100 Ver. 1.40

    27-Nov-2023
    0400911702

    Unduh

    Saya telah membaca dan memahami disclaimer di bawah, dan ingin mengunduh perangkat lunak yang ditunjuk.

    OS

    • Windows 11
    • Windows 10 (x64)
    • macOS 14

    Detail

    Firmware Version 1.40 incorporates the following enhancements:

    1. Adds support for CR-N100.
    2. Adds support for the latest camera's firmware.
    CR-N700 (Ver. 1.3.0), CR-N500 (Ver. 1.4.0), CR-N300 (Ver. 1.4.0), CR-X300 (Ver. 1.2.0)
    Please update camera and this controller to the latest firmware.
    3. Adds the ability to control Auto Tracking Application RA-AT001 and Auto Loop Application RA-AL001.
    4. Adds the ability to change on/off of thumbnail create/update when preset/trace registration.
    5. Adds the ability to change on/off of still image display while moving to preset position.
    6. Adds the ability to set the direction in which the camera operates when performing zoom operations with the zoom lever.
    7. Adds a mode that allows only pan/tilt/zoom/focus/preset/trace-related control.

    For details on how to update the firmware, refer to "Firmware update procedure" in the ReadMe file.

    <Firmware file>
    - RCIP100_V140_r001.bin

    <Supported Models>
    LAN (XC Protocol)
    　CR-N700, CR-N500, CR-N300, CR-N100, CR-X300, EOS C500 Mark II, EOS C300 Mark III, EOS C70, XF605
    SERIAL (NU Protocol)
    　CR-X500, CR-X300, XF605

    The firmware contains software modules developed by third parties. The details are available in the download: ReadMe-E.txt, ThirdPartySoftware-E.pdf (Third Party Software) and the license conditions are available in the ThirdPartySoftware folder which is inside the LICENSE folder.


    Update Riwayat

    Ver. 1.30
    1. Adds support for CR-N700.
    　Please update camera and this controller to the latest firmware.
    2. Adds the ability to save camera settings to the camera.
    3. Adds the ability to recall preset position at registered speed in preset memory.
    4. Adds the ability to change on/off of zoom-linked pan & tilt speed control per each camera.
    5. Adds the ability to select item to save in preset memory from "All", "PTZF" and "Camera Settings."

    Ver. 1.20
    1. Adds the ability to select Angle & Off of shutter speed mode.
    2. Adds the ability to support Angle control.
    3. Adds the ability to support ISO control.
    4. Adds the ability to support color compensation (CC) control of white balance.
    5. Adds the ability to select a custom picture file.
    6. Adds the ability to support Spatial Filter & Frame Correlation control.
    7. Adds the ability to select Advanced of digital zoom.
    8. Adds the ability to select Dynamic IS as the image stabilization mode.
    9. Adds the ability to support:
    　- Gain Boost
    　- Face Detection AE
    　- Eye Detection AF
    　- AWB Hold
    　- Shockless WB control
    10. Adds the ability to select [Shutter], which supports parameter change of all shutter modes.
    11. Adds the ability to select [MENU Control], which works as a shortcut button for MENU Control screen.
    12. Adds the ability to change the Network settings of serial camera when camera is not connected to controller.
    13. Adds a Confirmation box before entering the [BUTTON CUSTOMIZATION] screen.
    14. Adds the ability to display remaining time as a countdown during trace playback.

    Ver. 1.10
    1. Added support for enhanced ND filter control/color bars control.
    2. Added support for [IR Cut Filter]/[Digital Zoom] control when a serial camera is connected.
    3. When connecting to a serial camera, the tally status from the rear tally terminal can now be displayed on the camera button.
    4. Improved operability of knob control.
    5. Improved responsiveness when reflecting the setting values of the camera.
    6. Improved responsiveness when displaying the tally status on the camera button.
    7. Improved responsiveness when the button switches to recording or stopped recording after pressing the [Rec] button.
    8. Zoom operation is now possible on the MENU Control screen.
    9. Improved operability when controlling OSD MENU etc. with a joystick.
    10. Minor bug fixes.

    Ver. 1.01
    1. It is now possible to specify time or speed level for Pan/Tilt/Zoom operations when calling presets.
    2. Able to now stop a preset operation by the [Stop] button.
    3. It is now possible to assign the functions related to presets to each button or knob.
    4. It is now possible to set the direction in which the camera operates when performing Pan/Tilt operations with the control lever.
    5. The camera switching time when selecting a camera to operate has been shortened.
    6. Changed the operation method when assigning the Iris function to a knob.
    　Rotating clockwise: Lowers the F value
    　Rotating counter-clockwise: Raises the F value
    7. Changed the factory default settings.
    　Before update:
    　　[F1] Focus
    　　[F2] Iris
    　　[USER1] One Shot AF
    　　[USER2] Shooting Mode
    　After update:
    　　[F1] Time (sec.) / Speed
    　　[F2] Zoom Speed
    　　[USER1] Speed Mode
    　　[USER2] Stop
    8. Minor bug fixes.


    Persyaratan Sistem

    Windows 10 64bit, Windows 11
    macOS 14


    Peringatan

    Do not turn off the unit while performing the firmware update.
    The settings cannot be brought over when updating the firmware from V1.00.
    　Export the settings before updating and import after the update is complete.
    　Also, the network settings of the main unit are not subject to export, so it will need to be set again.
    Update the camera to the latest firmware.


    Instruksi Pengaturan

    1. Download the file to any folder.
    2. Extract files from a compressed file (ZIP file).
    3. For further instructions, refer to Readme in the decompressed folder.


    Informasi File

    1. Nama File : rcip100-v140.zip
    2. Versi File : 1.40
    3. Tipe File : zip
    4. Ukuran File 2590KB

    Penolakan

    Semua perangkat lunak, program (termasuk namun tidak terbatas pada driver), file, dokumen, manual, instruksi, atau materi lainnya (secara bersama-sama disebut "Konten") tersedia di situs ini atas dasar "sebagaimana adanya".

    Canon Singapore Pte. Ltd., dan perusahaan afiliasinya (“Canon”) tidak memberikan jaminan dalam bentuk apa pun sehubungan dengan Konten, secara tegas menyangkal semua jaminan, tersurat maupun tersirat (termasuk, tanpa batasan, jaminan tersirat tentang dapat diperjualbelikan, kesesuaian untuk tujuan tertentu dan non-pelanggaran) dan tidak bertanggung jawab untuk memperbarui, mengoreksi, atau memberikan dukungan Konten.

    Canon memiliki semua hak milik, kepemilikan, dan hak kekayaan intelektual yang relevan dalam Konten. Anda dapat mengunduh dan menggunakan Konten hanya untuk penggunaan pribadi, non-komersial, dan dengan risiko Anda sendiri. Canon tidak bertanggung jawab atas kerusakan apa pun sehubungan dengan Konten, (termasuk, tidak terbatas untuk kerusakan tidak langsung, sebagian, ganti rugi atau kerusakan tidak disengaja).

    Anda tidak boleh mendistribusikan, menetapkan, melisensikan, menjual, menyewakan, menyiarkan, mentransmisikan, menerbitkan, atau mentransfer Konten ke pihak lain mana pun. Anda juga tidak boleh (dan tidak akan membiarkan orang lain) mereproduksi, memodifikasi, memformat ulang, membongkar, mendekompilasi, atau merekayasa balik atau membuat karya turunan dari Konten, secara keseluruhan atau sebagian.

    Anda setuju untuk tidak mengirim atau membawa Konten keluar dari negara/wilayah tempat Anda awalnya memperolehnya ke negara/wilayah lain tanpa izin yang diperlukan dari pemerintah yang berlaku dan/atau melanggar undang-undang, batasan, dan peraturan yang berlaku.

    Dengan melanjutkan mengunduh Konten, Anda setuju untuk terikat oleh hal di atas serta semua hukum dan peraturan yang berlaku untuk pengunduhan dan penggunaan Konten oleh Anda.