01-Jul-2024
0400974102
Saya telah membaca dan memahami disclaimer di bawah, dan ingin mengunduh perangkat lunak yang ditunjuk.
Firmware Version 1.5.0 incorporates the following fixes and enhancements:
1. Adds Lite version of the automatic tracking application. Lite version application has basic features of the automatic tracking application.
2. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], and [Black: Master Black Blue] more widely.
3. Revises the display of Clear Scan Settings.
4. Adds function for setting a limit on the range of operation of the pan/ tilt.
5. Enables the ability to set zoom and focus speeds in more detail.
6. Enables the ability to make [Speed Level] of Preset Setting a finer adjustment at lower speeds.
7. Adds function for color bar output.
8. Adds function for selecting SDI output timecode superposition on or off.
9. Displays the Camera Name set by the user at the top of the settings Page.
10. Increases target bit rate limit when using encryption with SRT protocol.
11. Fixes minor issues.
Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.
<Firmware file>
- crn500-v150.bin
The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.
Ver. 1.4.0
1. Adds support for registering the still thumbnail when a preset memory is registered.
2. Adds support for registering the still thumbnail of the trace start position.
3. Adds function for freeze image during preset moving.
4. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
5. Adds support for setting up to four output destinations for the free-d protocol.
6. Adds the option "other than network settings and management information" as restore items for the backup/ restore function.
7. Adds Backup/ Restore function for Add-On Applications System settings.
8. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
9. Fixes minor issues.
Ver. 1.3.0
1. Adds support [Add-On Applications System] that extends camera functions by installing paid applications.
*When the application is ready for release, we will inform you on our website.
2. Adds support for NDI 5.
*NDI: An open standard for connecting video equipment over a network.
3. Adds record button for camera settings
4. Adds the ability to allow passwordless login for the image quality page.
5. Adds speed setting when registering presets.
6. Adds support for simplified Chinese UI.
7. Improves PTZ usability in settings pages. (Adds drag to move feature)
8. Video output from SDI/ HDMI is possible by default when no LAN cable is inserted.
9. Adds angle for shutter mode (adjusting with open angle).
10. Adds function for fine-tuning the WB color correction value (CC).
11. Adds support for licenses activation tool.
*When the application is ready for release, we will inform you on our website.
Ver. 1.2.0
1. Adds support for SRT protocol.*
*SRT Protocol: A widely used video transmission protocol for video streaming and live broadcast, developed and open sourced by Haivision and supported by the SRT Alliance.
2. Adds support for free-d protocol.*
*free-d protocol: A widely used protocol for camera tracking communication, mainly in virtual studio systems.
3. Fixed a bug that sometimes caused the pan/ tilt/ zoom to not move to the correct position during prolonged continuous power supply. (Same as correspondence of Ver. 1.1.4)
4. Fxied a bug in 'Genlock function'.
However, when using the Genlock function, select Level A as the mapping method for the output signal of the 3G-SDI connector.
If you select Level B, the V phase may shift. (Same as correspondence of Ver. 1.1.4)
Ver. 1.1.4 (Ver. 1.1.4 is not available on the Web. The amendments to Ver. 1.1.4 will be included in Ver. 1.2.0.)
1. Fixed a bug that sometimes caused the pan/ tilt/ zoom to not move to the correct position during prolonged continuous power supply.
2. Fixed a bug in 'Genlock function'.
However, when using the Genlock function, select LevelA as the mapping method for the output signal of the 3G-SDI connector.
If you select LevelB, the V phase may shift.
Ver. 1.1.3
1. Fixed bugs in 'Preset Settings' and 'Trace function'.
2. Improved AF accuracy during zoom operation (near infinity).
3. Improved synchronization of video and audio during long time playback.
4. Fixed a bug that caused the camera to stop when using some controllers.
5. Minor bug fixes.
Ver. 1.1.1
1. Fixed a bug that made blue lines appear on the left and upper edges of the screen, depending on the combination of specific conditions.
Ver. 1.1.0
1. Able to now specify desired [Time] or [Speed Level] for Pan/ Tilt/ Zoom operations when calling presets.
By this, when calling a preset, the Pan/ Tilt/ Zoom operations start at the same time and finish at the same time.
2. Able to now stop a preset operation by the [Stop] button.
3. Minor bug fixes.
Windows 10 64bit, Windows 11
macOS 14, macOS 13
Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.
Semua perangkat lunak, program (termasuk namun tidak terbatas pada driver), file, dokumen, manual, instruksi, atau materi lainnya (secara bersama-sama disebut "Konten") tersedia di situs ini atas dasar "sebagaimana adanya".
Canon Singapore Pte. Ltd., dan perusahaan afiliasinya (“Canon”) tidak memberikan jaminan dalam bentuk apa pun sehubungan dengan Konten, secara tegas menyangkal semua jaminan, tersurat maupun tersirat (termasuk, tanpa batasan, jaminan tersirat tentang dapat diperjualbelikan, kesesuaian untuk tujuan tertentu dan non-pelanggaran) dan tidak bertanggung jawab untuk memperbarui, mengoreksi, atau memberikan dukungan Konten.
Canon memiliki semua hak milik, kepemilikan, dan hak kekayaan intelektual yang relevan dalam Konten. Anda dapat mengunduh dan menggunakan Konten hanya untuk penggunaan pribadi, non-komersial, dan dengan risiko Anda sendiri. Canon tidak bertanggung jawab atas kerusakan apa pun sehubungan dengan Konten, (termasuk, tidak terbatas untuk kerusakan tidak langsung, sebagian, ganti rugi atau kerusakan tidak disengaja).
Anda tidak boleh mendistribusikan, menetapkan, melisensikan, menjual, menyewakan, menyiarkan, mentransmisikan, menerbitkan, atau mentransfer Konten ke pihak lain mana pun. Anda juga tidak boleh (dan tidak akan membiarkan orang lain) mereproduksi, memodifikasi, memformat ulang, membongkar, mendekompilasi, atau merekayasa balik atau membuat karya turunan dari Konten, secara keseluruhan atau sebagian.
Anda setuju untuk tidak mengirim atau membawa Konten keluar dari negara/wilayah tempat Anda awalnya memperolehnya ke negara/wilayah lain tanpa izin yang diperlukan dari pemerintah yang berlaku dan/atau melanggar undang-undang, batasan, dan peraturan yang berlaku.
Dengan melanjutkan mengunduh Konten, Anda setuju untuk terikat oleh hal di atas serta semua hukum dan peraturan yang berlaku untuk pengunduhan dan penggunaan Konten oleh Anda.