01-Jul-2024
0400974302
Saya telah membaca dan memahami disclaimer di bawah, dan ingin mengunduh perangkat lunak yang ditunjuk.
Firmware Version 1.3.0 incorporates the following fixes and enhancements:
1. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], and [Black: Master Black Blue] more widely.
2. Revises the display of Clear Scan Settings.
3. Adds function for turning [S/N Priority] ON or OFF when [Noise Reduction] is set to [Auto]. When ON, noise reduction is prioritized.
4. Adds function for setting a limit on the range of operation of the pan/ tilt.
5. Enables the ability to set zoom and focus speeds in more detail.
6. Enables the ability to make [Speed Level] of Preset Setting a finer adjustment at lower speeds.
7. Displays the Camera Name set by the user at the top of the Settings Page.
8. Increases target bit rate limit when using encryption with SRT protocol.
9. Fixes minor issues.
Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.
<Firmware file>
- crx300-v130.bin
The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.
Ver. 1.2.0
1. Adds support for registering the still thumbnail when a preset memory is registered.
2. Adds support for registering the still thumbnail of the trace start position.
3. Adds function for freeze image during preset moving.
4. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
5. Adds support for setting up to four output destinations for the free-d protocol.
6. Adds the option "other than network settings and management information" as restore items for the backup/ restore function.
7. Adds Backup/ Restore function for Add-On Applications System settings.
8. Adds Support for shutter and white balance settings in the NU protocol.
9. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
10. Fixes minor issues.
Ver. 1.1.0
1. Adds support [Add-On Applications System] that extends camera functions by installing paid applications.
*When the application is ready for release, we will inform you on our website.
2. Adds support for NDI 5.
*NDI: An open standard for connecting video equipment over a network.
3. Adds record button for camera settings
4. Adds support for SRT protocol.*
*SRT Protocol: A widely used video transmission protocol for video streaming and live broadcast, developed and open sourced by Haivision and supported by the SRT Alliance.
5. Adds the ability to allow passwordless login for the image quality page.
6. Adds speed setting when registering presets.
7. Adds support for simplified Chinese UI.
8. Improves PTZ usability in settings pages. (Adds drag move feature)
9. Video output from SDI/ HDMI is possible by default when no LAN cable is inserted.
10. Adds angle for shutter mode (adjusting with open angle).
11. Adds function for fine-tuning the WB color correction value (CC).
12. Adds support for free-d protocol.*
*free-d protocol: A widely used protocol for camera tracking communication, mainly in virtual studio systems.
13. Adds support for licenses activation tool.
*When the application is ready for release, we will inform you on our website.
Ver. 1.0.1
1. Fixes an issue which may cause the pan/ tilt/ zoom not to move to the correct position during prolonged use of power supply.
2. Fixes an issue which phase adjustment function of Genlock not possible.
Windows 10 64bit, Windows 11
macOS 14, macOS 13
Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.
Semua perangkat lunak, program (termasuk namun tidak terbatas pada driver), file, dokumen, manual, instruksi, atau materi lainnya (secara bersama-sama disebut "Konten") tersedia di situs ini atas dasar "sebagaimana adanya".
Canon Singapore Pte. Ltd., dan perusahaan afiliasinya (“Canon”) tidak memberikan jaminan dalam bentuk apa pun sehubungan dengan Konten, secara tegas menyangkal semua jaminan, tersurat maupun tersirat (termasuk, tanpa batasan, jaminan tersirat tentang dapat diperjualbelikan, kesesuaian untuk tujuan tertentu dan non-pelanggaran) dan tidak bertanggung jawab untuk memperbarui, mengoreksi, atau memberikan dukungan Konten.
Canon memiliki semua hak milik, kepemilikan, dan hak kekayaan intelektual yang relevan dalam Konten. Anda dapat mengunduh dan menggunakan Konten hanya untuk penggunaan pribadi, non-komersial, dan dengan risiko Anda sendiri. Canon tidak bertanggung jawab atas kerusakan apa pun sehubungan dengan Konten, (termasuk, tidak terbatas untuk kerusakan tidak langsung, sebagian, ganti rugi atau kerusakan tidak disengaja).
Anda tidak boleh mendistribusikan, menetapkan, melisensikan, menjual, menyewakan, menyiarkan, mentransmisikan, menerbitkan, atau mentransfer Konten ke pihak lain mana pun. Anda juga tidak boleh (dan tidak akan membiarkan orang lain) mereproduksi, memodifikasi, memformat ulang, membongkar, mendekompilasi, atau merekayasa balik atau membuat karya turunan dari Konten, secara keseluruhan atau sebagian.
Anda setuju untuk tidak mengirim atau membawa Konten keluar dari negara/wilayah tempat Anda awalnya memperolehnya ke negara/wilayah lain tanpa izin yang diperlukan dari pemerintah yang berlaku dan/atau melanggar undang-undang, batasan, dan peraturan yang berlaku.
Dengan melanjutkan mengunduh Konten, Anda setuju untuk terikat oleh hal di atas serta semua hukum dan peraturan yang berlaku untuk pengunduhan dan penggunaan Konten oleh Anda.