Installing the scanner driver from the CD-ROM (Windows)

Update Terakhir : 12-Nov-2007
Nomor isu : 8100046900

Solusi

Do NOT connect the scanner to a computer before installing the scanner driver.

CAUTION

* Do NOT connect the scanner to a computer before installing the scanner driver. The scanner may not operate properly if it is connected to a computer before installing the software. Pay attention to this point.

* You need to restart your computer after the installation is completed. Read this page carefully and quit all running applications before starting the installation.

* If your Windows computer is used with multiple users, log in as an Administrator (System administrator) to install the software. Continue the installation if your computer is not used with multiple users. Refer to the manual or help of Windows for details.

* The Setup CD-ROM contains softwares and important information that will not be reissued or redistributed if it is once lost or damaged. Store it in a safe place after the installation.

1. Place the CanoScan Setup CD-ROM in the drive.

* The main menu of the CanoScan Setup appears.

2. Click [Install].

The Notes on Software Installation will be displayed.

3. Read the Notes on Software Installation and click [Next].

4. Click [Install] on the "Install" screen.

In this example, all of the softwares and "Scanning Guide" will be installed.

The License Agreement will be displayed.

5. When the "License Agreement" screen appears, read it carefully and click [Yes].

6. Following the instruction on the screen, click [Install] or [Next] to install the selected softwares.

Softwares will be installed in the order displayed on the screen.

During the installation, do not click any items other than those specified in dialogs (messages) that appear on the screen.

* Do not click [Cancel] while the following dialog box is displayed.

* After installation of the scanner driver, installation of each application will start.

The installer or installation wizard of each application starts sequentially. Click [Yes] or [Next] to continue the installation.

7. When the "Completion" message appears, click [Next] to install the next software.

8. When the message "Software installation is complete. " appears, click [OK].

A message prompting you to restart the computer will be displayed.

9. Click [Restart].

You cannot use the scanner unless you restart the computer.

10. After the computer is restarted, remove the CanoScan Setup CD-ROM from the drive.

If the menu screen appears, click [Exit] and then remove the CD-ROM.

11. Connect the scanner to your computer.