Hubungi kami

Executing Calibration for the first scan

Update Terakhir : 26-Des-2007
Nomor isu : 8100066500

Solusi

Calibration is automatically performed for the first film scan or after a certain amount of scan.

If scanning film, pull out the film from the Film Adapter Unit when the message dialog is displayed, then press the [OK] button when you are ready.

The calibration process will start and take approximately 1 to 2 minutes.

"Executes preview." is displayed when calibration is completed.

Set the film with care as described in the following note before pressing the [OK] button.

Align the borderlines between frames with the guidelines of the unit.