Solusi
Removing the Paper Feeder
IMPORTANT
When moving or servicing the printer, remove the paper feeder and paper cassette.
1. Turn the printer OFF.
If you are using WSD, the shutdown notifies the computer that the printer is turned OFF.
2. If a USB cable is connected, turn the computer off, and then disconnect the USB cable.
3. Disconnect the power plug from the AC power outlet.
4. Remove all the interface cables and the power cord from the printer.
5. Pull out the paper cassettes from the printer and paper feeder.
6. Lift the printer unit and remove it from the paper feeder.
Installing the Paper Feeder
1. When installing the printer unit on the paper feeder, gently set it down so that each surface of the printer unit is flush with the front or side surfaces of the paper feeder.
Also, match the positioning pins (A) and connector (B) when setting the printer unit.
2. Set the paper cassette in the printer unit and paper feeder.
3. Connect the interface cables except for the USB cable, and connect the power cord.
4. Plug the power plug into the AC power outlet.
5. Connect the USB cable.
IMPORTANT
Be sure to turn the printer ON once when loading paper in the paper cassette for the first time after installing the paper feeder.
NOTE
After installing the paper feeder, you have to specify the settings for the optional accessories in the [Device Settings] sheet in the printer driver. You can obtain information about the status of the optional accessories automatically by clicking [Get Device Status] in the [Device Settings] sheet.
If you cannot obtain the status of the optional accessories of the printer automatically, select the installed optional accessories from [Paper Source Options].
Precautions on Reinstalling the Paper Feeder
IMPORTANT
- Do not touch the connector (A) in the paper feeder. This may result in damage to the printer or misfeeds.
- Make sure that the front cover and multi-purpose tray are closed before carrying the printer.
- If there is any packing material remaining inside the paper feeder, this may result in misfeeds or damage to the printer when operating the printer. Be sure to remove all the packing materials following the procedure.
- If the printer unit cannot be placed on the paper feeder properly, lift the printer unit once, hold it horizontally, and place it again. If you try to set the printer unit forcefully without lifting it, the connector and positioning pins may be broken.
Indonesia
