Ethernet Driver

    16-Des-2011
    8100133600

    Solusi

    You can specify the communication speed and Ethernet connection speed. The default setting is <AUTO>.

    1. Press [Additional Functions].

    2. Press [<-] or [+>] to select <SYSTEM SETTINGS>, then press [OK].

    If the System Password has been set, enter the System Password using the numeric keys, then press [OK].

    3. Press [<-] or [+>] to select <NETWORK SETTINGS>, then press [OK].

    4. Press [<-] or [+>] to select <ETHERNET DRIVER>, then press [OK].

    5. Press [<-] or [+>] to select <AUTO DETECT>, then press [OK].

    6. Press [<-] or [+>] to select the desired detection method, then press [OK].

    • <AUTO>: Automatically determines the communication speed (Half duplex/Full duplex) and Ethernet type (10Base-T/100BaseTX). Skip to step 11.
    • <MANUAL>: You have to manually specify the communication mode and Ethernet type.

    NOTE
    If you reconnect the network cable (for example, reconnect the cable to a different Ethernet hub) with the power on, the Auto Detect function will not work even if you set <AUTO DETECT> to <AUTO>. (Connect the cable with the power off.)

    7. If you have selected <MANUAL> in step 6, press [<-] or [+>] to select <COMMUNICATION MODE>, then press [OK].

    8. Press [<-] or [+>] to select the desired communication method, then press [OK].

    • <FULL DUPLEX>: Sends and receives simultaneously.
    • <HALF DUPLEX>: Sends and receives alternately.

    9. Press [<-] or [+>] to select <ETHERNET TYPE>, then press [OK].

    10. Press [<-] or [+>] to select the desired Ethernet connection type, then press [OK].

    • <100 BASE-TX>: Establishes a 100Base-TX network connection.
    • <10 BASE-T>: Establishes a 10Base-T network connection.

    11. Press [Stop/Reset] to return to the standby mode.

    12. Restart the machine.