Loading Envelopes
10-Mei-2008
8200151500
Solusi
Envelopes must be fed from the Rear Tray. Use either European DL or US Comm. Env. #10-sized envelope.
IMPORTANT
- You need to print from the computer to print on envelopes.
- Do not use the following envelopes:
- Envelopes with a double flap (or sticker flaps)
- Envelopes with an embossed or treated surface
- Envelopes with pressure seals
- Envelopes whose gummed flaps are already moistened and adhesive
NOTE
In Windows, print guidance will be displayed when envelopes are printed. To prevent display of print guidance, refer to "Printing Envelopes" in the PC Printing Guide on-screen manual.
1. Prepare the envelopes.
- Press down on all four corners and edges of the envelopes to flatten them.
- If the envelopes are curled, hold the opposite corners and gently twist them in the opposite direction.
- If the flap of an envelope is curled, flatten it.
- If the leading edge of an envelope is puffed up or curled, use a pen to press the envelope flat and sharpen the crease. Press the envelope flat, working from the middle to the edge.
* The above illustrations show a side view of the leading edge of the envelope.
IMPORTANT
The envelopes may jam in the machine if they are not flat or the edges are not aligned.
Make sure that no curl or puff exceeds 0.1 inches / 3 mm.
2. Load the envelopes.
(A) Printing orientation
(B) Make sure the flaps are folded.
(1) Retract the Paper Support.
IMPORTANT
Envelopes may not be fed properly if the Paper Support is extended.
(2) Load the envelope against the Cover Guide (the right side of the Paper Support).
Load with the address side facing UP and the rear flaps DOWN on the left.
Up to 10 envelopes can be loaded at once.
NOTE
Make sure that the Cover Guide is set upright.
(3) Slide the Paper Guide against the left side of the envelope.
(4) Press the Feed Switch so that the Rear Tray lamp (C) lights up.
3. Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows, select DL Env. or Comm. Env. #10 in Page Size.
In Macintosh, select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.
IMPORTANT
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the wrong direction.
NOTE
For details on printer driver settings, see "Printing with Windows " or "Printing with Macintosh".