Confirming the Setup Flow
23-Jul-2008
8200258000
Isu
Sebab dan Solusi
Before starting setup, decide on the most suitable connection method for the machine.
This machine can be used over a wireless or wired LAN, as well as via USB connection.
Preparation for Setup
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk, and setting configured
according to the connection method. In addition, configure the machine's LAN settings to connect to the network. Read the following carefully before starting setup.
USB
- A:USB cable
Install the Software (USB Connection)
Windows
Wired LAN
- B:LAN cable
- C:Router
IMPORTANT
- Before connecting the machine to the network, confirm that configuration of the computer and network devices (router, access point, etc.) is complete, and that the computer can connect to the network. For the procedures to connect a network device to the computer and set them up, refer to the manual of your network device or contact its manufacturer.
- The machine cannot be used over a wired and wireless LAN at the same time.
Install the Software (First-time Setup for Use over Wired LAN)
Machine's LAN Setting
1. Use the Easy-Scroll Wheel (A) or the 
or
button to select Settings, then press the OK button.
or button to select Settings, then press the OK button.
Wireless LAN
- D:Access point
IMPORTANT
- Before connecting the machine to the network, confirm that configuration of the computer and network devices (router, access point, etc.) is complete, and that the computer can connect to the network. For the procedures to connect a network device to the computer and set them up, refer to the manual of your network device or contact its manufacturer.
- The machine cannot be used over a wired and wireless LAN at the same time.
Install the Software(First-time Setup for Use over Wireless LAN)
Machine's LAN Setting
1. Use the Easy-Scroll Wheel (A) or the or button to select Settings, then press the OK button.
or button to select Settings, then press the OK button.Install the Software (WPS Connection)
WPS Connection
Install the Software (WCN Connection)
WCN Connection
You can set the wireless LAN security on the machine easily by using the WCN (Windows Connect Now) function of Windows Vista together with a USB flash drive.
Install the Software (To set up an additional computer)