How do I print with the date (Card Direct)
06-Agu-2008
8200278700
Solusi
This section describes how to insert the memory card into a printer and print images recorded in the memory card.
CAUTION
- To select an item that is displayed on the printer's LCD monitor, press
the printer's <Up, Down, Left, Right> buttons. To finalize the selection, press 
the <SET> button.
- You can rotate the <Easy-Scroll Wheel> instead of pressing the printer's <Up, Down, Left, Right> buttons to select an item that is displayed.
- Check if the printer is connected to a camera or a PC.
- This printer supports DCF standard image data (compliant with Exif Print standard) and DPOF (compliant with Version 1).
- There are cases where images are not displayed or printed correctly if the images were edited on a PC.
- When printing images that were shot with mobile phones, there are cases where the images are not displayed or printed correctly depending on the image size that was set during shooting.
- Please use memory cards that have been initialized with the camera. There are cases where images are not recognized if memory cards that were initialized with a PC are used.
- Screens, menu listings, or the locations of the buttons may differ depending on the printer model being used.
1. Turn on the printer and insert the memory card.
Turn on the printer. Insert the memory card with its label facing the front. Insert the memory card into the corresponding slot. There is a guide (groove) that matches the size of the memory card in the slot for [SD / MMC+ / miniSD] cards. Insert a small memory card (a miniSD card, etc.) all the way to the end by following the guide. Insert only one memory card.
2. The following screen appears on the printer's LCD monitor.
3. When pressing the <MENU> button (
), the following screen appears, so select [Print Settings].
), the following screen appears, so select [Print Settings]. 
4. The following screen appears. You can set [Date] or [Borders] in this screen. Press the <BACK> button (
) after making settings.
) after making settings. 
5. The following screen appears, so press the <SET> button (
).
).
6. The following screen appears, so press the <BACK> () button to return to the image-selection screen.
) button to return to the image-selection screen.
7. The following screen appears.
Select the images you want to print, and then press the <COPIES> (
) buttons to specify the number of copies.
The screen shows the number of sheets that are required for printing.8. If you press either the <SET> button () or the <Enlarge> button (
) with the image selected, the image will be enlarged to the size of the monitor (Single View). As described in Step 7, the number of copies can be set by pressing the <COPIES> buttons ().
) or the <Enlarge> button () with the image selected, the image will be enlarged to the size of the monitor (Single View). As described in Step 7, the number of copies can be set by pressing the <COPIES> buttons ().
The number of copies of the selected image. The total number of copies.9. If you press the <DISP.> button (
), the image information will appear.
), the image information will appear.
The slot where the [Memory Card] is inserted is displayed. [File Number]
[Recording Pixels]
[Paper Type]
[Paper Status]
[Number of Displayed Image / Total Number of Images]
[Time and Date]** The file update time for images that were processed and edited by a PC is displayed.
10. If you press the <DISP.> button () again, the details of print settings will appear.
) again, the details of print settings will appear.
If you have set [Date] or [Borders], check whether these settings are reflected.
[Date] [File No.] [Borders] [Page Layout] [Correct Red-Eye] [My Colors]If you press the <PRINT> button (
), printing will start.
), printing will start.11. The following screen appears and printing starts.
NOTE
- The date used in the date imprint is the shooting date in the Exif data included with each image data. If the image data does not contain Exif information, the file modification date is used as the date imprint.