Solusi
You can make various settings for scanning documents. After finishing scan settings, press
(Start) to start scanning.
You can adjust the density to the most appropriate level for the document you send.
2. Press
[FAX].
3. Press
[Density].
4. Press [
] or [
] to adjust the density, then press [OK].
- [ ]: to make light documents darker.
- [ ]: to make documents lighter.
NOTE
This setting returns to the default after all documents are scanned.
5. Specify the destination and send your documents.
Selecting Image Quality (Fax)
You can adjust the image quality of the document you send. The higher image quality you set, the better the output will be, but the longer the transmission will take.
The default setting is <STANDARD>.
2. Press
[FAX].
3. Press
[Image Quality] repeatedly to select the image quality, then press [OK].
- <STANDARD>: for most text-only documents (200 x 100 dpi)
- <FINE>: for fine-print documents (the resolution is twice that of <STANDARD>) (200 x 200 dpi)
- <PHOTO>: for documents that contain photographs (the resolution is twice that of <STANDARD>) (200 x 200 dpi)
- <SUPER FINE>: for documents that contain fine print and images (the resolution is four times that of <STANDARD>) (200 x 400 dpi)
NOTE
This setting returns to the default after all documents are scanned.
4. Specify the destination and send your documents.
2-Sided Document (Fax) (MF4380dn Only)
You can set the machine to automatically turn over 2-sided documents that are placed in the ADF, and scan each side separately.
1. Place documents in the ADF.
2. Press
[FAX].
3. Press
[2-Sided] repeatedly to select the binding type, then press [OK].
- <2-SIDED BOOK>: The front and back sides of the document have the same top-bottom orientation.
- <2-SIDED CALENDAR>: The front and back sides of the document have opposite top-bottom orientations.
4. Specify the destination and send your documents.