Checking the Toner Level
06-Sep-2011
8200337400
Solusi
You can check the amount of toner remaining in the toner cartridge.
1. Press 
[Job Cancel/Status Monitor] repeatedly to select <TONER GAUGE>, then press [OK].
[Job Cancel/Status Monitor] repeatedly to select <TONER GAUGE>, then press [OK].NOTE
The toner level is displayed on the display at five levels. If the toner gauge indicates that the toner is empty, it is recommended that the toner cartridge be replaced.
- Toner full
- Toner high
- Toner low
- Toner near empty
- Toner empty
2. Press 
[Stop/Reset] to return to the standby mode.
[Stop/Reset] to return to the standby mode.