Setting the Flash (Flash On)

05-Mar-2009
8200441200

Solusi

    When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
    CAUTION
    • Screens or menu listings may differ depending on the camera model being used.
    • As the actual locations of buttons / switches on cameras vary depending on the camera model, the illustrations that appear on this page may differ from your camera.
    • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] ().
    • In the following shooting modes, you cannot set the [Flash] to the On setting to make it fire every time you shoot.
    - [AUTO] (), [Easy] (), [Fireworks] (), [ISO 3200] (), [Digital Macro] (), [Zoom Blur] (), [Movie] ()

    1. Press the <Power> button on the camera.




    2. Press the <Flash> () button or the right <directional button> ([Flash]).




    3. The following screen will appear in the LCD screen.



    Operate the <directional buttons> to select the [Flash On] ().
    Make sure to select [On].


    4. If the following icon is displayed on the monitor*, this completes the setting process.
    * The icon display location differs depending on the model being used.