Solusi
Using the Address Book Key
[Address Book] search enables you to search for a recipient registered in the machine. This is useful when you forget which one-touch key or coded dial code the recipient you want is registered under.
2. Press
[FAX].
3. Press
[Address Book] repeatedly to select <NAME SEARCH> or <ADD/TEL SEARCH>, then press [OK].
- <NAME SEARCH>: Searches a destination by name.
- <ADD/TEL SEARCH>: Searches a destination by fax number.
- If no recipient is registered in the Address Book, <NOT REGISTERED> is displayed.
4. Use
–
,
[numeric keys] to enter the first letter of the recipient's name or the first part of the fax number.
For example, if you want to search for a name that starts with the letter "C", press
(ABC). Entries starting with the letter you entered are displayed if any entries are registered. You can switch the input mode by pressing
[Tone].
- [:A]: Letter mode
- [:1]: Number mode
5. Press
or
to search for the recipient.
-
: Displays recipients in alphabetical order.
-
: Displays recipients in reverse order.
6. When the desired recipient is displayed, press [OK].
7. Press
[Start].
When you place the documents on the platen glass, press
or
to select the document size, then press
[Start] for each document. When scanning is complete, press [OK] to start sending.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if you have specified the destination by any other method than using
–
,
[numeric keys] and
[Tone], the machine starts scanning automatically without pressing
[Start], after the preset time for this setting is elapsed.
You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 6.
- Density
- Image Quality
- 2-Sided
You can specify up to 20 destinations using one-touch keys.
2. Press
[FAX].
3. Press the desired one-touch key (01 to 19).
If you pressed a wrong key, press
[Stop/Reset], then try again.
4. Press
[Start].
When you place the documents on the platen glass, press
or
to select the document size, then press
[Start] for each document. When scanning is complete, press [OK] to start sending.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if you have specified the destination by any other method than using
–
,
[numeric keys] and
[Tone], the machine starts scanning automatically without pressing
[Start], after the preset time for this setting is elapsed.
You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 3.
- Density
- Image Quality
- 2-Sided