How do I connect the Compact Photo (CP) printer to a computer? (Macintosh)
07-Sep-2009
8200626600
Solusi
This section describes how to install the printer driver on your Macintosh.
(The printer driver is software that is required to connect the printer to the Macintosh.)
CAUTION
- The following instructions are intended for Mac OS X (v10.4).
- Do not connect the printer to the Macintosh until the installation of the printer driver is finished.
- The printer may not operate correctly if it is connected to a computer via a USB hub.
- If other USB devices (excluding USB mouse devices and USB keyboards) are connected to the computer while performing these operations, the driver may not be installed correctly.
- Do not put your computer into the standby mode (or sleep mode) while the printer is connected to the computer's USB port. If you accidentally do so, awaken the computer from the standby mode without disconnecting the USB cable.
- Some of the images that appear on this page contain a specific camera model name, however the actual model name varies depending on the camera used.
1. Quit all running applications.
2. Load the [COMPACT PHOTO PRINTER Solution Disk] CD-ROM that came with your printer into the computer's CD-ROM drive.
3. Double-click the CD-ROM icon that appears on the desktop.
4. The following window will appear, so double-click on [CPSD Installer] to start it.
5. The following screen appears.
6. When the following screen appears, click on the area in which you live.
If [Asia] or [Oceania] is chosen, this setup procedure will proceed to Step 8.
7. The following screen will appear.
Select the country where you live.
Click [Next].8. The following screen will appear. Click [Install].
9. The following screen will appear.
Select [Easy Installation]. Click [Next].10. The following screen will appear. Read the content carefully, and then click [Agree].
11. The following screen will appear. Click [Next].
12. If the following screen appears, enter the name and password set for your Macintosh.
Enter your [Name] and [Password]. Click [OK].13. The following screen appears.
Select [Easy Install]. Click [Install].14. If the following screen appears, click [Next].
15. The following screen appears, and installation starts.
16. The following screen appears. Click [Quit].
17. The following screen appears, and installation starts.
18. If the following screen appears, enter the name and password set for your Macintosh.
Enter your [Name] and [Password]. Click [OK].19. The following screen may appear and if it does not, please proceed to step 21.
If you want to register later, select [No, I will register later.], and then click [Next].
[No, I will register later.], and then click [Next].20. The following screen appears. Click [OK].
21. The following screen appears. Click [Finish].
22. The following screen appears. Click [YES] to restart the Macintosh.
23. Install the [cartridge] to the printer.
For details on how to set up the printer for printing, please refer to the link below.
24. Connect the printer to the computer with a commercially available USB cable.
PC's USB terminal Commercially available USB cable
Printer's USB terminalAfter connecting, turn on the printer.
25. The software will start and the following screen will appear when a connection between the printer and the computer is established.
If the [Card size paper is loaded.] (If Card Size is selected) message appears in the [Printer] box, and [OK] in the [Printer connection] box, the printer and the computer are properly connected, and the printer is ready for printing.
NOTE
- Perform Steps 23 to 24 to automatically start [SELPHY Photo Print] the next time you use it.
If the software does not start automatically, select from the Dock (the bar that appears at the bottom of the screen) [SELPHY Photo Print] and click the icon.
On the screen in Step 25, if the [Connect the printer.] message appears in the [Printer connection] box, follow the steps below to register the printer. In addition, if you want to use your printer with a software application other than [SELPHY Photo Print], please follow the steps below.
26. From [Apple menu] (
), select [System Prefernces].
[Apple menu] (), select [System Prefernces].
27. The following screen appears. Click [Print & Fax].
28. The following screen appears. Click [+].
29. The following screen appears.
Select your printer. Click [Add].30. The following screen appears.
Check whether the name of your printer is displayed.Click the (
) button to close the window.
() button to close the window.