Solusi
Set Up a USB Connection (Software Installation)
Do not connect the USB cable yet.
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.)
IMPORTANT
- Quit all running applications before installation.
- Log on as the administrator (or a member of the Administrators group).
- Do not switch users during the installation process.
- Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
- It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
- For the system requirements, refer to "Specifications".
- If you connect the machine via USB cable before installing the software:
For Windows 7
(1) Remove the USB cable connected to your computer.
(2) Proceed to 1.
For Windows Vista/Windows XP
This dialog box may appear.
(1) Remove the USB cable connected to your computer.
If the dialog box closes, proceed to 1.
(2) Click Cancel.
(3) Proceed to 1.
Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later is required to use this software. An Internet connection is required for installation.
1.
Press the ON button (A) to TURN OFF THE MACHINE.
Operating noise may continue for up to 40 seconds until the machine turns off.
IMPORTANT
Do NOT connect the USB cable to the computer and the machine yet. If you have already connected the cable, disconnect it now.
2.
Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
If you are using Windows, the setup program starts automatically.
NOTE
If the program does not start automatically, double-click the CD-ROM icon
in Computer or My Computer. When the CD-ROM contents appear,
double-click MSETUP4.EXE.
3.
Windows XP ->4
Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Yes or Continue.
4.
Select your place of residence, then click Next.
NOTE
If the Select Language screen appears, select a language, then click Next.
5.
Select a country or region, then click Next.
6.
Click Easy Install.
The drivers, application software, and on-screen manuals are installed.
NOTE
If you want to select particular items to install, click Custom Install.
8.
Select Use the printer via USB, then click Next.
Follow any on-screen instructions to proceed with the software installation.
Important Information for the Installation
When the Printer Connection screen appears, connect the machine to the computer with a USB cable.
The USB Port is located on the right side of the machine.
NOTE
The supplied wireless LAN setup cable can be used as well.
- Necessary Information for the User
Registration
When the serial number is not displayed on the registration screen automatically, input the serial number located inside the machine (as shown in the illustration).
IMPORTANT
If the power is on, the FINE Cartridge Holder will move when the Scanning Unit (Cover) (B) is opened.
- If the Extended Survey Program screen appears
If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.)
9.
Click Exit to complete the installation.
For Macintosh
It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
10.
For Windows
Solution Menu EX starts.
For Macintosh
Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog.
Remove the Setup CD-ROM and keep it in a safe place.
NOTE
The buttons displayed on Solution Menu EX may vary depending on the country or region of purchase.
1.
Press the ON button (A) to TURN OFF THE MACHINE.
Operating noise may continue for up to 40 seconds until the machine turns off.
IMPORTANT
Do NOT connect the USB cable to the computer and the machine yet. If you have already connected the cable, disconnect it now.
2.
Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
If you are using Windows, the setup program starts automatically.
3.
Double-click the Setup icon of the CD-ROM folder to proceed to the following screen. Enter your administrator name and password, then click OK.
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop.
If you do not know your administrator name or password, click the help button, then follow the on-screen instructions.
4.
Select your place of residence, then click Next.
NOTE
If the Select Language screen appears, select a language, then click Next.
5.
Select a country or region, then click Next.
6.
Click Easy Install.
The drivers, application software, and on-screen manuals are installed.
NOTE
If you want to select particular items to install, click Custom Install.
8.
Select Use the printer via USB, then click Next.
Follow any on-screen instructions to proceed with the software installation.
Important Information for the Installation
When the Printer Connection screen appears, connect the machine to the computer with a USB cable.
The USB Port is located on the right side of the machine.
NOTE
The supplied wireless LAN setup cable can be used as well.
- Necessary Information for the User
Registration
When the serial number is not displayed on the registration screen automatically, input the serial number located inside the machine (as shown in the illustration).
IMPORTANT
If the power is on, the FINE Cartridge Holder will move when the Scanning Unit (Cover) (B) is opened.
- If the Extended Survey Program screen appears
If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.)
9.
Click Exit to complete the installation.
For Macintosh
It is necessary to restart the computer before scanning using the Operation Panel on the machine for the first time.
10.
For Windows
Solution Menu EX starts.
For Macintosh
Solution Menu EX starts when clicking OK in the Canon Solution Menu EX dialog.
Remove the Setup CD-ROM and keep it in a safe place.
NOTE
The buttons displayed on Solution Menu EX may vary depending on the country or region of purchase.