How to set Continuous Shooting (PowerShot SX130 IS)

Solusi

    You can shoot continuously at a maximum speed of approximately 1.0 images/second while the <shutter button> is pressed fully and held.
    NOTE
    • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] ()
    • Cannot be used with the self-timer
    • Continuous shooting speed increases in mode [Low Light] ().
    • For a certain interval, images may not be recorded, and the shooting speed for may slow down depending on the shooting conditions and the camera settings.
    • As the number of images increases, the shooting speed may slow down.
    • If the flash fires, the shooting speed may slow down.
    • In the following shooting modes, you cannot set the [Continuous] ().
    - [AUTO] (), [Easy] (), [Smart Shutter] (), [Movie] ()

    1. Press the <Power> button.


    2. Press the <FUNC./SET> () button.




    3. The following screen appears on the LCD monitor.



    Operate the <directional buttons> up or down to select the [Single Shot] ().


    4. The following screen appears on the LCD monitor.



    Operate the <directional buttons> right to select the [Continuous Shooting] ().
    Press the <FUNC./SET> () button.


    5. The following screen appears on the LCD monitor.



    If the [Continuous] () icon is displayed on the upper-left part of the screen, the setting is completed.
    As long as you hold the <shutter button> down, the camera will shoot successive images.

    There are three modes of continuous shooting so that you can select an appropriate one depending on the scene.
    Drive ModeDescription
    ContinuousApprox. 1.0
    images/sec., max.
    The camera shoots continuously with the focus and exposure set when the shutter button is pressed halfway.
    Continuous Shooting AF*Approx. 0.6
    images/sec., max.
    The camera shoots continuously and focuses.The [AF Frame] is set to [Center].
    Continuous Shooting LV*Approx. 0.7
    images/sec., max.
    The camera shoots continuously with the focus fixed to the position set in manual focus. In ( ), the focus is locked on the first shot.
    * When in [Fireworks] (), shooting with the [Manual Focus] () modes, [Continuous Shooting AF] () will change to [Continuous Shooting LV] ().