Basic Methods for Scanning Documents to a File Server (SMB)

Update Terakhir : 19-Des-2011
Nomor isu : 8200927100

Solusi

This section describes the basic procedure for sending scanned documents to a computer that acts as a file server on a network. For information on the required settings to be made beforehand, refer to the related information.

NOTE

If you select a file format for color from the <Color/File Format Settings>, you will not be able to consecutively scan multiple-page originals from the platen glass. If you want to consecutively scan multiple-page originals using a file format for color, use the feeder instead.

1. Place your originals.

2. Press

(Main Menu).

3. Use [

] , [

] or

(Scroll Wheel) to select <Send/Fax> or <Scan to Store>, then press [OK].

If you select <Scan to Store>, use [

] , [

] or

(Scroll Wheel) to select <Store on File Server>, then press [OK].

4. Use [

] , [

] or

(Scroll Wheel) to select <Enter File Server (New)>, then press [OK].

NOTE

You can specify the address using the Address Book or One-touch registered beforehand. For instructions on how to register the Address Book and One-touch, refer to the related information.

5. Use [

] , [

] or

(Scroll Wheel) to select <Windows (SMB)> or <Windows (SMB) : Browse>, then specify the file server's address.