Adjusting the Printhead (iPF815/iPF825)

    18-Okt-2010
    8200966400

    Solusi

      If printed documents are affected by the following problems, try adjusting the printhead.
      • Printing is faint or affected by banding in different colors
      Execute Nozzle Check to check for printhead nozzle clogging.
      • Printed vertical lines are warped or colors are out of alignment
      Use Auto Head Adj. or Manual Head Adj to adjust the printhead position.
      Normally, use Auto Head Adj.. However, when using special paper or if printing is not improved after executing Advanced Adj. in Auto Head Adj., try Manual Head Adj.
      • Printed lines are misaligned
      Execute Head Inc. Adj. to adjust the angle of inclination of the printhead.
      Even slight misalignment can be corrected.
      • Paper rubs against the printhead, or image edges are blurred
      Executing Head Height to adjust the printhead height may improve printing results.