Video Output Signals by Terminal (XF105/XF100)
Solusi
The video signal output from the HD/SD SDI (
only), HDMI OUT and HD/SD COMPONENT OUT terminals depends on the clip’s video configuration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on various menu settings. Video output from the AV terminal will always be in 480/60i standard.
only), HDMI OUT and HD/SD COMPONENT OUT terminals depends on the clip’s video configuration, the capability of the external monitor (for video output from the HDMI OUT terminal) and on various menu settings. Video output from the AV terminal will always be in 480/60i standard.Refer to the following table for the video output Signal from each terminal. If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor.
| Recording frame size / Frame rate | HD/SD SDI Terminal(*1)(*2) | HDMI OUT Terminal(*2)(*3) | HD/SD COMPONENT OUT Terminal(*2)(*4) | AV Terminal | |||
| HD output | SD output | HD output | SD output | HD output | SD output | SD output | |
| 1080/60i 1080/30P 1080/24P 1080/slow or fast motion | 1080/60i | 480/60i(*5) | 1080/60i | 480/60P | 1080/60i | 480/60i | 480/60i |
| 720/60P 720/30P 720/24P 720/slow or fast motion | 720/60P | 480/60i(*5) | 720/60P | 480/60P | 720/60P | 480/60i | 480/60i |
*1: Set [Video Setup] -> [SDI Output] to [HD], [SD] or [Off].
*2: When you set [MLCD/VF Setup] -> [HD Output] (under [Zebra]) to [On], you can display zebra patterns on an external monitor. In such case, output from the HD/SD SDI terminal ( only) and HD/SD COMPONENT OUT terminal will be in HD, regardless of their setting.
only) and HD/SD COMPONENT OUT terminal will be in HD, regardless of their setting.*3: Video output will automatically switch to HD or SD, depending on the capability of the external monitor.
*4: Set [Video Setup] -> [Component Output] to [HD] or [SD].
*5: When output from the HDMI OUT terminal is SD (480/60P), the output of the HD/SD SDI terminal will also be 480/60P.
NOTE
When the camcorder is connected via HDMI OUT terminal to an external monitor, the video signal output from the HD/SD SDI terminal will be the same as that from the HDMI OUT terminal.