FINE Cartridge Holder Does Not Move to the Position for Replacing

    01-Des-2010
    8201011600

    Isu


    Sebab dan Solusi

    Check 1: Is the Power lamp off?
    Check if the Power lamp is lit green.
    The FINE Cartridge Holder will not move unless the power is on. If the Power lamp is off, close the Scanning Unit (Cover) and turn the machine on.
    While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops flashing and remains lit green, and then open the Scanning Unit (Cover) again.

    Check 2: Is an error message displayed on the LCD?
    Close the Scanning Unit (Cover), follow the directions displayed in the error message to resolve the error, and then reopen it. For details on how to resolve the error, see [ An Error Message Is Displayed on the LCD ].

    Check 3: Has the Scanning Unit (Cover) been left open for 10 minutes or longer?
    If the Scanning Unit (Cover) is left open for more than 10 minutes, the FINE Cartridge Holder moves to the right to prevent the Print Head from drying out. Close and reopen the Scanning Unit (Cover) to return the FINE Cartridge Holder to the position for replacing.

    Check 4: Has the machine been printing continuously for a long period?
    Close the Scanning Unit (Cover), wait a while, then reopen it.
    If the machine has been printing continuously for a long time, the FINE Cartridge Holder may not move to the position for replacing since the Print Head may overheat.
    REFERENCE
    • Opening the Scanning Unit (Cover) while printing moves the FINE Cartridge Holder to the right. Close the Scanning Unit (Cover), and reopen it after printing is complete.