How to set High-Speed Continuous Shooting (High-speed Burst) and Group Playback (PowerShot SX230 HS / SX220 HS)

Update Terakhir : 08-Feb-2011
Nomor isu : 8201085700

You can shoot continuously at a maximum speed of approximately 8.1 images/second while the <shutter button> is pressed fully and held.

NOTE

Recording pixels are fixed to 1984 x 1488 pixels ().
Focus, exposure and white balance settings are set with the first shot.
Depending on the shooting conditions, camera settings and the zoom position, the shooting speed may slow down.
As the number of images increases, the shooting interval may take longer.
[ISO speed] is set to [AUTO] ().
The main functions that are not available in the [High-speed Burst] () mode are as follows:

- [Flash] (

), [Date Stamp], [Self-Timer] (

)

For unavailable functions other than the ones indicated above, see the [Camera User Guide] supplied with the product.

1. Press the <Power> button and Set the <Mode Dial> to (

).

2. Press the <FUNC./SET> (

) button.

3. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select [Rec. Mode] (If no changes have been made so far, [Smart Shutter] (

) will be displayed).

Press the <FUNC./SET> (

) button.

4. The following screen appears on the LCD monitor.

Operate the <directional buttons> up or down to select [High-speed Burst] (

).

Press the <FUNC./SET> (

) button.

5. The following screen appears on the LCD monitor.

If the [High-speed Burst] (

) icon is displayed on the upper-right part of the screen, the setting is completed.

As long as you hold the <shutter button> down, the camera will shoot successive images.

When playing back images, images taken in [High-speed Burst](

) mode are displayed in a group with only the first image displayed, however, grouped images can also be viewed individually.

IMPORTANT

If you erase a grouped image, all the images in the group will also be erased. Be sure to exercise adequate caution.

REFERENCE

To view images taken in [High-speed Burst] () mode as a group, press <MENU> (), and then select [On] for [Group Images] in the [Playback Menu] () tab. (By default, [On] is selected.)