How to Set the Receive Mode (FAX-L100/FAX-L120)
30-Jan-2012
8201399600
Solusi
1. Press [Menu].
2. Use [Up/Down] to select [RX SETTING?], then press [OK].
3. Use [Up/Down] to select [5 RX MODE?], then press [OK].
4. Use [Left/Right] to select the receive mode, then press [OK].
[FAX/TEL]: Switches between fax and voice calls automatically. For optional settings, see below.
[MANUAL]: Does not answer any call. You have to manually receive faxes.
[FAX ONLY]: Answers all calls as faxes and disconnects voice calls.
[AnsMode]: Receives faxes automatically and records voice messages. For optional settings, see below.
NOTE
a. For [FAX/TEL] and [MANUAL], make sure the optional handset or an external telephone is connected to the machine.
b. For [AnsMode], make sure an answering machine is connected to the machine.
5. Press [Stop/Reset] to return to standby mode.
FAX/TEL: Optional Settings If required, change the optional settings as follows:
[SET RING START TIME]: Use the numeric buttons to enter the duration (0 to 30 seconds) for which the machine listens for the fax tone before it starts ringing. Press [OK].
[SET F/T RING TIME]: Use the numeric buttons to enter the duration (10 to 45 seconds) of ringing. Press [OK].
[SET DEFAULT ACTION]: Use [Left/Right] to select the default action the machine will take after the ringing ends, then press [OK].
- [RECEIVE]: Tries to receive the document.
- [DISCONNECT]: Disconnects the call.
AnsMode: Optional Settings If required, change the optional settings as follows:
[SET CHECK TAD TIME]: Use the numeric buttons to enter the duration (10 to 30 seconds) for which the machine waits until the connected answering machine takes the call. Press [OK].
[SET FAX DETECT TIME]: Use the numeric buttons to enter the duration (10 to 70 seconds) for which the machine attempts to detect the fax tone. Press [OK].