Isu
The following are probable causes when unevenness appears on the printout results. Follow the described instructions.
Sebab dan Solusi
Cause 1:
There is a possibility that paper is too moist or too dry since the paper has been stored in unsuitable condition.
Remedy:
Replace the paper with new one and print again.
See Related Information about the following title(s) at the end of this page as needed.
Cause 2:
There is a possibility that any toner cartridge is nearing the end of its life.
Remedy:
See the following points and replace the toner cartridge that is almost empty with a new toner cartridge.
See Related Information about the following title(s) at the end of this page as needed.
Cause 3:
There is a possibility that the printer has not printed for a long period of time.
Remedy:
Set [Special Print Mode] to [Special Settings 8] in the printer driver.
See Related Information about the following title(s) at the end of this page as needed.
IMPORTANT
Normally, use the printer with [Special Print Mode] set to [Off]. Set [Special Print Mode] to [Special Settings 8] only when this problem occurs.