The printer generates abnormal noise or loud operating sounds.

    17-Mei-2012
    8201554600

    Isu

    The following sounds may be generated while the printer is ON. However, they are not due to a printer problem or printer malfunction.
    - Noise is generated automatically due to performing calibration.
    - Big or sudden noise is generated during, before, or after printing.

    Sebab dan Solusi

    When the case does not fall within the above:
    Cause 1:
    There is a possibility that a foreign object such as paper or vinyl material is stuck inside the printer.
    Remedy:
    Open the front cover and make sure no foreign object such as paper or vinyl material is stuck inside the printer. If any foreign object is stuck, remove it and close the front cover.
    See Related Information about the following title(s) at the end of this page as needed.
    Cause 2:
    There is a possibility that the paper is inappropriate.
    Remedy:
    Replace the paper with one that can be used with this printer.
    See Related Information about the following title(s) at the end of this page as needed.
    Cause 3:
    There is a possibility that the paper is not loaded properly.
    Remedy:
    Load the paper properly.
    See Related Information about the following title(s) at the end of this page as needed.