The message <PC LOAD "size"> appears in the display on the control panel.
18-Jul-2012
8201608100
Isu
Sebab dan Solusi
The following are probable causes when the message <PC LOAD "size"> appears in the display on the control panel. Follow the described instructions.
Cause:
There is a possibility that the paper of the size specified in the application is not loaded in the paper cassette or multi-purpose tray, or the paper source for the different paper size is selected.
Remedy 1:
Load the paper of the size selected in the application (or the one specified by scaling factors).
Remedy 2:
If you are using the multi-purpose tray, check the size of the paper in the multi-purpose tray, and when the size does not match the size specified in the application (or the one specified by scaling factors), specify the setting properly.
Remedy 3:
Press the 
(Feeder Selection) key, then select the paper cassette in which the paper of the matched size is loaded.
(Feeder Selection) key, then select the paper cassette in which the paper of the matched size is loaded.Remedy 4:
Press the 
(Online) key, then print to the currently loaded paper forcibly. If you are using the multi-purpose tray, the paper size setting for the multi-purpose tray automatically changes to the setting specified in the application.
(Online) key, then print to the currently loaded paper forcibly. If you are using the multi-purpose tray, the paper size setting for the multi-purpose tray automatically changes to the setting specified in the application.See Related Information about the following title(s) at the end of this page as needed.
- How to load paper in Cassette
- How to load paper (other than envelopes) in the multi-purpose tray
- How to load envelopes in the multi-purpose tray
- How to load custom size paper (non-standard size paper) in the paper cassette
- How to load custom size paper (non-standard size paper) in the multi-purpose tray
- Specifying the paper size and page setup