Isu
Image edges are blurred or white banding occurs
Sebab dan Solusi
<Cause 1> The Platen suction is too strong.
<Corrective Action 1>
In the Control Panel menu, reduce the level of VacuumStrngth.
<Corrective Action 2>
Close the blue Switch on the platen so that it matches the paper size.
<Cause 2> Incorrect Printhead alignment value.
<Corrective Action 1>
When printing fine lines or text at high precision on glossy or semi-glossy photo or proofing paper, set the optimal Printhead height before aligning the printhead.
<Corrective Action 2>
In the Control Panel menu, set Head Height to a lower height.
<Cause 3> The type of paper specified in the printer driver does not match the type loaded in the printer.
<Corrective Action 1>
Load paper of the same type as you have specified in the printer driver.
<Corrective Action 2>
Make sure the same type of paper is specified in the printer driver as you have loaded in the printer.
1. Press the Stop button and stop printing.
2. Change the type of paper in the printer driver and try printing again.
Indonesia