29-Nov-2012
8201674600
| Cause | Corrective Action |
| The paper feed amount is out of adjustment. | Adjust the feed amount. (See "Adjusting the Feed Amount (iPF9400) (iPF9400S).") |
| Printing does not proceed smoothly because print jobs are interrupted during transmission. | Exit other applications and cancel other print jobs. |
| In the Control Panel menu, Adj. Priority is set to Print Length. | Setting Adj. Priority to Print Quality in the Control Panel menu and adjusting the feed amount may improve results. (See "Adjusting the Feed Amount (iPF9400) (iPF9400S).") |
| The Printhead is out of alignment. | Adjust the Printhead alignment. (See "Automatic Adjustment to Straighten Lines and Colors (Head Posi. Adj.) (iPF9400) (iPF9400S).") |
| The Printhead nozzles are clogged. | Print a test pattern to check the nozzles and see if they are clogged. (See "Checking for Nozzle Clogging (iPF9400) (iPF9400S).") |
| Streaks may occur if you set the Print Quality too low. | Choose a higher level of Print Quality in the Advanced Settings of the printer driver and try printing again. Printing in Fast or Standard mode is faster and consumes less ink than in Highest quality or High modes, but the printing quality is lower. |
| The type of paper specified in the printer driver does not match the type loaded in the printer. | Load paper of the same type as you have specified in the printer driver. |
| Make sure the same type of paper is specified in the printer driver as you have loaded in the printer. 1. Press the Stop button and stop printing. 2. Change the type of paper in the printer driver and try printing again. |