Solusi
Connect two cameras via Wi-Fi and send images between them as follows.
NOTE
- Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function. You cannot connect to PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this camera.
- Up to 50 images can be sent together at once. You can send movies together as long as the total playback time is within two minutes.
- Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level.
Connecting the cameras wirelessly
Perform the following operations on both of the cameras to be connected.
1. Press the <Playback> (
) button to turn the camera on.
NOTE
When making the settings for Wi-Fi for the first time, a screen will appear for you to register a nickname for the camera.
Touch inside the frame to access the keyboard, and then enter a nickname. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi.
3. Touch [
].
4. Drag your finger up or down on the screen to choose [Add a Device].
NOTE
- Once a camera is added, the camera nickname will be displayed on the screen in step 4. To connect to a camera again, simply choose the camera nickname from the list.
5. The following screen appears.
Camera connection information will be added when [Start connection on target camera] is displayed on both camera screens.
6. Once both cameras are connected, a screen like the one below will appear.
NOTE
- To add multiple cameras, repeat the above procedures starting from step 2.
Sending Images Individually
7. Touch [Send this image].
NOTE
- You can choose the resolution (size) of images to send by touching [
] on the image transmission screen.
- Movies cannot be resized.
8. The following screen appears.
After the image has been sent to the target camera and the [Transfer completed] message appears, return to step 7.
9. Touch [Select and send].
10. The following screen appears.
- Touching an image to send will label it with a [
] icon.
- To cancel selection, touch the image again. [ ] is no longer displayed.
- To view fewer thumbnails per screen, spread your fingers apart. You can also set single image display and drag your finger right or left choose an image.
- After you finish choosing images, touch [OK].
11. The following screen appears.
NOTE
You can choose the resolution (size) of images to send.
Indonesia
