I want to select an AF frame before shooting (EOS 70D)

Update Terakhir : 27-Jun-2013
Nomor isu : 8201841500

Solusi

NOTE

Icons used on this page:

<

>: AF point selection button / <

>: AF area selection button / <

>: Multi-controller / <

>: Main Dial / <

>: Quick Control Dial

You can manually select the AF point or zone. If 19-point automatic selection AF + AI Servo AF has been set, you can select any position where AI Servo AF is to start.

1. Set the camera’s power switch to <ON>.

2. Set the lens focus mode switch to <AF>.

3. Turn the Mode Dial to a Creative Zone mode.

4. Press the <

> or the <

> button.

The selected AF point will be displayed in the viewfinder and on the LCD panel.

In the Zone AF mode, the selected zone will be displayed.

5. Select an AF point.

The AF point selection will change in the direction you tilt <>. If you　press <>, the center AF point (or center zone) will be selected.
You can also select a horizontal AF point by turning the <> dial and select a vertical AF point by turning the <> dial.
In the Zone AF mode, turning the <> or <> dial will change the zone in a looping sequence.

NOTE

When you hold down the <> button and turn the <> dial, you can select a vertical AF point.
When you press the <> or <> button, the LCD panel displays the following:

・19-point automatic selection AF and Zone AF (manual zone selection):

・1 pt AF (Manual selection):

(Center)/

(Off center)

・With

C.Fn II-10: Manual AF pt. selec. pattern], you can set either [Stops at AF area edges] or [Continuous]. For more information, please refer to [C.Fn II -10 Manual AF point selection pattern] in the camera`s instruction manual.