Dengan lanjut menggunakan situs ini, anda setuju dengan syarat penggunaan dan kebijakan privasi kami (termasuk penggunaan cookies di situs ini untuk pengalaman yang lebih baik).
Konsumen Bisnis
ENG BAHASA INDONESIA
Konsumen
Beralih ke: Bisnis
Dukungan
ENG BAHASA INDONESIA
  1. Dukungan
  2. Cari
  3. Unduh
Hubungi kami

Adding Cinema-Look Filters to Recorded Scenes

15-Mei-2013
8201846300

Solusi

    You can add Cinema-Look filters to AVCHD and MP4 movies saved to a memory, and save them to the other memory card.
    The movies will be saved in MP4.
    REFERENCE
    The effects of Cinema-look filters applied during shooting and those applied when converting to MP4 may differ.

    The procedure for adding Cinema-Look filters to recorded scenes is explained below.

    1. Set the power switch to MEDIA.



    • Open the desired movie index screen.

    2. Touch [ ].



    3. Touch [Convert to MP4 [ ] or [Convert to MP4 [ ].
    *The menu for copying from the memory card used for playback to the other memory card will be displayed.



    4. Touch [OK].



    5. Select the desired video quality of converted movies.


    NOTE
    Before selecting the video quality, touch [Join Scenes] to join the converted movies into one movie.

    6. Touch the individual scenes you want to add the filters to.
    • A checkmark will appear on the scenes you touch. The total number of selected scenes will appear next to the .


    NOTE
    To remove all checkmarks at once, touch [Remove All] > [Yes].

    7. Touch [OK].



    8. Touch [Next].



    9. Touch [FILTER1].



    10. Select the filter you want to add, and then touch [OK].


    NOTE
    To Remove the filter, touch [FILTER1-9].

    11. Touch [START] to convert the scene.


    NOTE
    Touch [STOP] to interrupt the operation while it is in progress.

    12. Touch [OK].



    ・Based on the following options, movies will be converted and then copied .
    Recording mode before conversionVideo quality options
    AVCHD MP4
    28 Mbps LPCM (59.94P),28 Mbps (59.94P)35 Mbps (59.94P) Cannot be converted
    24 Mbps LPCM, 17 Mbps, 5 Mbps 24 Mbps, 17 Mbps 24 Mbps, 17 Mbps, 4 Mbps, 3 Mbps
    – 4 Mbps 4 Mbps, 3 Mbps
    – 3 Mbps 3 Mbps
    ● Scenes with a frame rate of 23.98P can be joined only with other scenes with a frame rate of 23.98P. They cannot be joined with scenes with other frame rates.
    ● While converting movies, video and audio signals will not be output from the camcorder's terminals.

    This concludes the procedure for adding Cinema-Look filters to recorded scenes.