Setting AEB (Auto Exposure Bracketing) (PowerShot G16)
22-Agu-2013
8201905600
Solusi
When the camera is set to AEB (Auto Exposure Bracketing) mode, three consecutive images are captured at different exposure levels (standard exposure, underexposure, and then overexposure) each time you shoot. You can adjust the amount of underexposure and overexposure (relative to standard exposure) from –2 to +2 stops in 1/3-stop increments.
IMPORTANT
- The following procedures are explained based on the assumption that the shooting mode is set to [Program AE] (
). - AEB shooting is only available in [
] mode. - Continuous shooting is not available in this mode.
- In order to use [
], the [Shooting mode] must be set to one of the following modes:
-[Aperture priority AE] (
), [Shutter speed priority AE] (
), [Program AE] ()
), [Shutter speed priority AE] (), [Program AE] ()1. Turn the camera on.
2. Press the < 
> button, choose [ 
] in the menu, and then choose [ ].
> button, choose [ ] in the menu, and then choose [ ].
3. 3. Press the <
> button, and then adjust the setting by pressing the < 
><
> buttons or turning the < 
> dial.
> button, and then adjust the setting by pressing the < ><> buttons or turning the < > dial.
4. Press the shutter button all the way down to shoot.
- Three consecutive images will be captured.
NOTE
- If exposure compensation is already in use, the value specified for that function is treated as the standard exposure level for this function.
- You can also access the setting screen of step 3 by pressing the <MENU > button when the exposure compensation screen is displayed.
- Three shots are taken, regardless of any quantity specified in [
]. - In [Blink Detection] mode , this function is only available for the final shot.