How to set Continuous Shooting (PowerShot S120)

Update Terakhir : 22-Agu-2013
Nomor isu : 8201918400

Solusi

You can shoot pictures continuously as long as you hold down the shutter button.

IMPORTANT

The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] ().
Cannot be used with the self-timer or [Blink Detection].
Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
As the number of images increases, the shooting speed may slow down.
If the flash fires, the shooting speed may slow down.
With Touch Shutter, the camera will only take one shot instead of shooting continuously.

1. Press the <Power> button.

2. Press the <FUNC./SET> (

) button.

3. The following screen appears on the LCD monitor.

Press the <

><

>buttons to choose [Drive Mode] (

).

Press the <

><

> buttons to choose [Continuous] (

).

After making the selection, press the <FUNC./SET> (

) button.

4. The following screen appears on the LCD monitor.

If the [Continuous] (

) icon is displayed on the upper-left part of the screen, the setting is completed.

As long as you hold the <shutter button> down, the camera will shoot successive images.

NOTE

When using Face ID, the location in the image where the name is recorded will be determined in the first shot, and will be recorded in the same place for further shots.

The following drive modes are available. Please select them according to the scene being shot.

Mode	Description
Continuous	Continuous shooting, with the focus and exposure determined when you press the shutter button halfway.
Continuous Shooting AF*	Continuous shooting and focusing. [AF Frame] is set to [1-point] and cannot be changed.