Connecting a Telephone Line

    24-Sep-2013
    8201957300

    Solusi

      Follow the onscreen instructions provided by "Fax Setup Guide" to connect the telephone line.
      Take the following steps to display "Fax Setup Guide" on the screen.
      [ ] (Menu) -> <Fax Settings> -> <Fax Setup Guide>

      1. Press [OK].
      The screen that appears varies, depending on the receive mode selected.



      2. Connect the machine to the telephone line connector.
      Follow the steps below to connect the line.
      • Plug the telephone line connector into the telephone line jack (A).
      • Plug an external device jack (B) into the telephone (Use this procedure when the receive mode is set to <Auto>).
      * To connect an external telephone that includes fax functions, make sure to disable its automatic fax reception feature so it does not receive faxes automatically.

      3. Press [OK] after the telephone line has been connected.

      4. Select <Yes> using [ ] and press [OK].
      The setup procedure is complete.



      5. Press [OK].



      6. Restart the machine to take effect the settings.
      Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.

      7. Change the line type.
      • By default, the telephone line type is set to tone dialing. Skip the following steps in the procedure below when you choose to use tone dialing.
      • Follow the steps in the procedure below to select pulse dialing.
      • Contact your local telephone company when you are not sure of the line type that you are using.
      (1) Press [ ] (Menu).
      (2) Select <Fax Settings> using [ ] or [ ] and press [OK].
      (3) Select <Basic Settings> using [ ] or [ ] and press [OK].
      (4) Select <Select Line Type> using [ ] or [ ] and press [OK].
      (5) Select the line type that you are using with [ ] or [ ] and press [OK].
      • <Pulse>: Pulse dialing
      • <Tone>: Tone dialing (Default)
      (6) Press [ ] (Menu) to close the menu screen.