How to set High-Speed Continuous Shooting (High-speed Burst HQ) and Group Playback (PowerShot SX700 HS)
18-Feb-2014
8202048700
Solusi
You can shoot a series of shots in rapid succession by holding the shutter button all the way down. You can shoot at a maximum speed of approx. 8.5 shots/sec.
* Up to four shots at once during continuous shooting
IMPORTANT
The drive mode is [ 
] in 
mode and cannot be changed.
] in mode and cannot be changed.NOTE
- HQ: High Quality
- Focus, image brightness, and color are determined by the first shot.
- The screen is blank while you are shooting.
- There may be a delay after continuous shooting before you can shoot again. Note that some types of memory cards may delay your next shot even longer. SD Speed Class 6 or higher memory cards are recommended.
- Shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
1. Press the power button to turn the camera on, and then set the <Mode Dial> to (
).
).
2. Press the <FUNC./SET> (
) button.
) button.3. Press the <
><
> buttons or turn the <
> dial to choose [Shooting Mode].
><> buttons or turn the <> dial to choose [Shooting Mode].Press the <FUNC./SET> () button.
) button.(If no changes have been made to the initial settings, [Portrait] (
) will be displayed.
) will be displayed.
4. Press the <><> buttons or turn the < > dial to choose [High-speed Burst HQ] (
), and then press the <FUNC./SET> () button.
><> buttons or turn the < > dial to choose [High-speed Burst HQ] (), and then press the <FUNC./SET> () button.
5. If the [High-speed Burst HQ] () icon is displayed on the upper-left part of the screen, the setting is completed.
) icon is displayed on the upper-left part of the screen, the setting is completed.
As long as you hold the <shutter button> down, the camera will shoot successive images.
- Shooting stops when you release the shutter button or reach the maximum number of shots, after which [Busy] is displayed and the shots are shown in the order you took them.
Images shot in [High-speed Burst HQ] (
) mode are grouped for display, and these grouped images can be viewed one at a time.
) mode are grouped for display, and these grouped images can be viewed one at a time.IMPORTANT
If you erase a grouped image, all images in the group are also erased. Be careful when erasing images.
REFERENCE
- To view images shot in [High Speed Burst EQ] () as a group, press the <MENU> (
) button, choose [Group Images] on the [Playback] (
) tab, and then choose [ON]. (The setting is [ON] by default.)
1. Choose a grouped image.
Press the <><> buttons or turn the <> dial to choose an image labeled with [ 
].
><> buttons or turn the <> dial to choose an image labeled with [ ].Press the <FUNC./SET> () button.
) button.
2. Press the <><> buttons or turn the < > dial to choose [Group Playback] (
), and then press the <FUNC./SET> () button.
><> buttons or turn the < > dial to choose [Group Playback] (), and then press the <FUNC./SET> () button.
3. Pressing the <
><
> buttons or turning the <> dial will display only images in the group.
><> buttons or turning the <> dial will display only images in the group.To cancel group playback, press the <FUNC./SET> (), choose [ ] in the menu, and press the <FUNC./SET> () button again.
), choose [ ] in the menu, and press the <FUNC./SET> () button again.