Konsumen Bisnis
ENG BAHASA INDONESIA
Konsumen
Beralih ke: Bisnis
Dukungan
ENG BAHASA INDONESIA
  1. Dukungan
  2. Cari
  3. Unduh
Hubungi kami

    Customizing the operation buttons on the EOS 7D Mark II (assigning functions other than the default functions to the buttons)

    18-Sep-2014
    8202158000

    Solusi

    You can assign often-used functions to camera buttons or dials according to your preferences.

    Customizing the Operation Buttons
    1. Set the lens’s focus mode switch to <AF>.



    2. Set the camera's power switch to <ON>.



    3. Set the Mode Dial to < P / Tv / Av / M / B>.



    4. Press the <MENU> button to display the menu screen.



    5. Press the <> button and select the [ ] tab.

    6. Turn the <> dial to select the [ ] tab.

    7. Turn the <> dial to select [Custom Controls], then press <>.

    8. Turn the <> dial to select a camera button or dial, then press <>.



    9. Turn the <> dial to select a camera function, then press <>.
    • If the [ ] icon appears on the bottom left, you can press the <INFO.> button and set other related options.

    10. Exit the setting.
    ● When you press <> to exit the setting, the screen in step 8 will reappear.
    ● Press the <MENU> button to exit.
    NOTE
    With the screen in step 8 displayed, you can press the <> button to revert the Custom Control settings to their defaults. Note that the [ : Custom Controls] settings will not be canceled even if you select [ : Clear all Custom Func. (C.Fn)].

    Assignable Functions to Camera Controls
    * The AF stop button () is provided only on super telephoto IS lenses.
    Function*
    AFMetering and AF start*1*1       
    AF stop       
    Switch to registered AF function   *2*2      
    ONE SHOT <-> AI SERVO       
    Switch to registered AF point   *3*3      
    Selected AF point ↔ Center/Registered AF point          *4
    AF point direct selection        *5 
    Direct AF point selection: Vertical          
    Direct AF area selection          
    ExposureMetering start          
    AE lock     
    AE lock (while button pressed)          
    AE lock (hold)     
    AE lock, AF stop         
    FE lock       
    Set ISO speed (hold button, turn )          
    ISO (hold down lever, turn )          
    Set ISO speed ( during meter)          
    Exposure compensation (hold button, turn )          
    Exposure compensation (hold down lever, turn )          
    Shutter speed setting in M mode         
    Aperture setting in M mode         

    Function*
    ImagesOne-touch image quality setting   *6 *6     
    One-touch image quality (hold)   *6 *6     
    Image quality          
    Picture Style          
    OperationDepth-of-field preview          
    IS start         
    Menu display          
    Register/recall shooting function *7*7        
    Image Playback          
    Magnify/Reduce (press SET, turn )          
    Cycle: ・ / DRIVE・AF / WB ・           
    Unlock while button pressed          
    Flash function settings          
    No function (disabled)   

    *1: When assigned to the < AF-ON > or <> button, pressing the <INFO.> button while the setting screen is displayed will enable you to set the detailed AF settings. When shooting, pressing the < AF-ON > or <> button will execute AF as it was set.
    *2: On the setting screen, press the <INFO.> button to display the detailed settings screen. Turn the <> or <> dial to select the parameter to be registered, then press <> to append a checkmark [ ]. When you select a parameter and press <>, you can adjust the parameter. By pressing the <> button, you can revert the settings to their defaults.
    *3: On the setting screen, when you press the <INFO.> button, you can select [Switch only when btn is held] or [Switch each time btn is pressed].
    *4: On the setting screen, when you press the <INFO.> button, you can select [Switch to center AF point] or [Switch to registered AF point].
    *5: On the Multi-controller setting screen, when you press the <INFO.> button, you can press the center of <> to select [Switch to center AF point] or [Switch to registered AF point].
    *6: On the setting screen, by pressing the <INFO.> button, you can select the image recording quality for this function.
    *7: On the setting screen, press the <INFO.> button to display the detailed settings. Turn the <> or <> dial to select the function to be registered, then press <> to append a checkmark [ ] to it. When you select a parameter and press <>, you can adjust the parameter. By pressing the <> button, you can revert the settings to their defaults. By selecting [Register current settings], the camera’s current settings will be registered.