Movie Playback with the Camera (EOS 7D Mark II)

    18-Sep-2014
    8202197600

    Solusi

      To play back movies recorded with the camera, follow the procedures below.

      1. Set the camera’s power switch to < ON >.



      2. Press the <> button to display the image.



      3. Turn the <> dial to select the movie to be played. In the single-image display, press <>.



      • With the () single-image display, the < > icon displayed on the upper left indicates a movie.
      • In the () index display, perforations at the left edge of a thumbnail indicate a movie. As movies cannot be played from the index display, press <> to switch to the single-image display.



      The movie editing panel will be displayed at the bottom of the screen.

      4. Turn the <> dial to select [ ], then press <>.



      The movie will start playing.
      • You can pause the movie playback by pressing <>.
      • You can adjust the sound volume during movie playback by turning the <> dial.

      Movie Playback Panel
      OperationPlayback Description
      PlayPressing <> toggles between play and stop.
      Slow motionAdjust the slow motion speed by turning the <> dial. The slow motion speed is indicated on the upper right of the screen.
      First frameDisplays the movie’s first frame.
      Previous frameEach time you press <>, the previous frame is displayed. If you hold down<>, it will rewind the movie.
      Next frameEach time you press <>, the movie will play frame-byframe. If you hold down <>, it will fast forward the movie.
      Last frameDisplays the movie’s last frame.
      EditDisplays the editing screen.
      Playback position
      mm' ss"Playback time (minutes:seconds with [Movie play count: Rec time] set)
      hh:mm:ss.ff (DF)
      hh:mm:ss:ff (NDF)
      Time code (hours:minutes:seconds:frames with [Movie play count: Time code] set)
      VolumeTurn the <> dial to adjust the volume of the built-in speaker or headphones.
      To return to the single-image display, press the < MENU > button.

      IMPORTANT
      • Before listening to a movie’s sound through headphones, turn down the volume to prevent hurting your ears.
      • The camera may not be able to play movies shot with another camera.
      NOTE
      • With a fully-charged Battery Pack LP-E6N, the continuous playback time at room temperature (23°C/73°F) will be approx. 3 hr. 20 min.
      • By connecting commercially-available headphones equipped with a 3.5 mm diameter stereo mini plug to the camera’s headphone terminal, you can listen to the movie’s sound
      • If you connect the camera to a TV set to play back a movie adjust the sound volume with the TV set. (Turning the <> dial will not change the sound volume.) If there is audio feedback, place the camera farther away from the TV set or turn down the TV sound volume.
      • If you took a still photo while you shot the movie, the still photo will be displayed for approx. 1 sec. during the movie playback.