Paper Handling
22-Sep-2014
8202245900
Solusi
| Type | Plain paper/Heavy paper/Photograph/Small documents (for example, index cards)/Special types of paper (for example, tracing paper, transparencies, etc.)/Booklet (Up to 24 mm thickness) |
| Size (W x L) | Up to 216 x 297 mm |
| Weight | Up to 2 kg |
| Paper Capacity | 1 sheet |
The shaded areas in the table below indicate the scan area of the document. Make sure that text and images in your documents fit within the shaded area. The scan area varies depending on the function used and where documents are placed.
| Copy |   The scan area for copying may differ from the printable area. |
| Scan |  |
Paper sizes that can be loaded in the paper drawer, and the manual feed slot are listed below.
A4 (210 x 297 mm)*1
B5 (182 x 257 mm)
A5 (148 x 210 mm)
Legal (216 x 356 mm)*1
Letter (216 x 279 mm)*1
Statement (140 x 216 mm)
Executive (184 x 267 mm)
Officio (216 x 318 mm)*1
B-officio (216 x 355 mm)*1
M-officio (216 x 341 mm)*1
Government - Letter (203 x 267 mm)
Government - Legal (203 x 330 mm)
Foolscap (216 x 330 mm)*1
Australian-foolscap (206 x 338 mm)
Indian Legal (215 x 345 mm)*1
Envelope COM10 (104.7 x 241.3 mm)
Envelope Monarch (98.4 x 190.5 mm)*2
Envelope C5 (162 x 229 mm)
Envelope DL (110 x 220 mm)
Index Card (76 x 127 mm)*2
Custom Paper Size*3
*1 Only in MF221d, automatic 2-sided printing is available without replacing paper.
*2 You can load Envelope Monarch and Index Card only in the manual feed slot.
*3 Custom paper size of 76.2 to 216.0 mm in width and 210 to 356 mm in length can be loaded in the paper drawer. Custom paper size of 76.2 to 216.0 mm in width and 127 to 356.0 mm in length can be loaded in the manual feed slot.
NOTE
The default paper size of the machine is set to A4. Change the paper size setting when using a different size of paper.
Chlorine-free paper can be used with this machine.
| Paper Type | Paper Capacity for Paper Drawer | Paper Capacity for Manual Feed Slot | |
| Plain paper*1 | 60 to 80 g/㎡ | 250 sheets | 1 sheet |
| 80 to 90 g/㎡ | 170 sheets | 1 sheet | |
| Heavy paper*2 | 90 to 105 g/㎡ | 170 sheets | 1 sheet |
| 105 to 163 g/㎡ | 100 sheets | 1 sheet | |
| Recycled paper*1 | 60 to 80 g/㎡ | 250 sheets | 1 sheet |
| 80 to 90 g/㎡ | 170 sheets | 1 sheet | |
| Color paper*1 | 60 to 80 g/㎡ | 250 sheets | 1 sheet |
| 80 to 90 g/㎡ | 170 sheets | 1 sheet | |
| Bond paper*3 | 60 to 163 g/㎡ | 100 sheets | 1 sheet |
| Transparency*4 | 50 sheets | 1 sheet | |
| Label | 100 sheets | 1 sheet | |
| Envelope | 20 sheets | 1 sheet | |
IMPORTANT
Do not use the following types of paper:
- Wrinkled or creased paper
- Curled or rolled paper
- Torn paper
- Damp paper
- Very thin paper
- Paper printed by a thermal transfer printer
- Highly textured paper
- Glossy paper
Paper handling and storage
- Store the paper on a flat surface.
- Keep the paper wrapped in its original package to protect the paper from moisture or dryness.
- Do not store the paper in such a way that may cause it to curl or fold.
- Do not store the paper vertically or stack too much paper.
- Do not store the paper in direct sunlight, or in a place subject to high humidity, dryness, or drastic changes in temperature or humidity.
NOTE
When printing on paper that has absorbed moisture
- Steam may emit from the paper output area, or water droplets may form on the back side of the operation panel or around the paper output area. There is nothing unusual about any of these occurrences, which occur when the heat generated from fixing toner on the paper causes moisture in the paper to evaporate (most likely to occur at low room temperatures).
The shaded areas in the image below indicate the printable area of the document.
