Solusi
You can add camera shooting dates when you print.
IMPORTANT
- Before printing images from a memory card or a USB memory, check to make sure that the printer is not connected to a camera or a computer.
- For memory cards that require an adapter, always insert the card into the adapter before inserting the adapter into the card slot. If you mistakenly insert the memory card into the card slot without an adapter, you may not be able to remove the card from the printer.
- For instructions, refer to the memory card or adapter user manual.
- Use a memory card formatted with the device you shot the photos with. Images on cards formatted with a computer may not be recognized.
- Images may not be displayed or printed correctly depending on their size or if they have been edited on a computer.
- JPEG images conforming to the Exif standard can be printed with SELPHY.
- For computer or photo software instructions, refer to the relevant user manual.
In this section, example procedures are shown using an SD memory card. You can print images by performing the same operations with USB memory or a memory card other than an SD memory card.
1.
Turn on SELPHY
and insert the memory card
or USB flash drive.
NOTE
Insert the memory card with the label face-up.
REFERENCE
2. The following screen appears on the printer's [LCD monitor].
3. Press the [
] button, press the [
], [
] buttons to select [Change Settings], and then press the [
] button.
4. Set [Date] in the screen shown above.
Press the [
], [
] buttons to select an item, and then press the [
], [
] buttons to adjust the settings.
NOTE
You can also make the [Layout] and [Border] settings as necessary.
Press the [
] button to confirm your choice.
5. Press the [
], [
] buttons to select [Select & Print], and then press the [
] button.
6. The following screen appears.
When you select [Date] and [Borders], make sure that these settings are shown with icons on the LCD monitor's right hand side.
[Borders, Page Layout]
[Print Finish]
[Brightness]
[My Colors]
[Date]
[Image Optimize]
[Smooth Skin]
[Correct Red-Eye]
NOTE
- If (
) is shown below an icon, the setting is [Off], and if an icon is dimmed, the setting is not available.
(
) [Date] [On]
(
) [Date] [Off]
(
) [Date] Cannot be set.*
*Depending on the layout, imprinting the date may not be possible.
7. Specify the number of copies for printing.
Number of copies of the displayed image (press the [
], [
] buttons to select the image you want to print, and then press the [
], [
] buttons to specify the number of copies to make).
Total number of sheets to be printed (The number of sheets of paper needed for printing will be displayed.)
8. Press the [
] button, and printing will start.
9. The finished image will look like the one shown below. (It will differ depending on the type of paper.)
In the following example, the [4-up] layout is set for a [Postcard size] sheet, and 3 is selected for the number of prints. (In this case, the number indicated in
of step 7 would be 3.)
IMPORTANT
To prevent two instances of the date on images already labeled by the camera, select [
Off].
NOTE
- Turning off SELPHY will restore the default setting of [ Off].
- The date added to prints cannot be changed, because it is the date assigned by the camera when the photos were taken.
- To change how the date displays, adjust [Date Format]
mm/dd/yyyy (default), dd/mm/yyyy, or yyyy/mm/dd
- Dates are not printed when [Page Layout] is set to [Index] or [ Shuffle].
Indonesia
