Shooting Long Exposures (Bulb) (PowerShot G5 X)
24-Agu-2015
8202710100
Solusi
With bulb exposures, shots are exposed for as long as you hold down the shutter button.
- Setting procedures are explained below.
1. Turn the camera on.
2. Set the mode dial to [ 
].
].
3. Turn the <
> dial to set the shutter speed to [BULB], and then press the <
> button.
> dial to set the shutter speed to [BULB], and then press the <> button.
4. [BULB] (
) is displayed on the shooting screen.
) is displayed on the shooting screen.
5. Press the shutter button all the way down to shoot.
Shots are exposed for as long as you hold the shutter button all the way down. The elapsed exposure time is displayed during exposure.
IMPORTANT
- Mount the camera on a tripod or take other measures to keep it still and prevent camera shake. In this case, also disable image stabilization
- When [Touch Shutter] is set to [On], shooting is started by touching the screen once and stopped by touching it again. Be careful not to move the camera when touching the screen.
NOTE
- To avoid camera shake that may otherwise occur when pressing the shutter button directly, you can shoot remotely or use an optional remote switch