Changing the Exposure Level Automatically / Auto Exposure Bracketing (AEB Shooting) (EOS M6)

Update Terakhir : 06-Feb-2017
Nomor isu : 8203430300

Solusi

When the camera is set to AEB (Auto Exposure Bracketing) mode, three consecutive images are captured at different exposure levels (standard exposure, underexposure, and then overexposure) each time you shoot. You can adjust the amount of underexposure and overexposure (relative to standard exposure) from –2 to +2 stops in 1/3-stop increments.

Standard exposure	Underexposure	Overexposure

IMPORTANT

AEB is not available when the flash setting is other than [ ], when Multi Shot Noise Reduction is on, or during continuous or bulb shooting.

1. Set the camera’s power to <ON>.

2. Choose a shooting mode.

Set the Mode Dial to <C1>*<C2>*<P><TV><Av><M>.

*Options vary depending on the assigned shooting mode.

3. Press the [MENU] button.

4. Press the [

], [

] buttons or turn the [

] dial to choose the [

- 4 ] tab, press the [

], [

] buttons or turn the [

] wheel to choose [AEB Settings], and then press the [

] button.

5. Press the [

], [

] buttons or turn the [

] dial to adjust the setting and then press [

].

To cancel the AEB function, follow steps 2 – 4 to set the AEB correction value to 0.

6. Press the [MENU] button to return to the shooting screen.

[

] is displayed.

7. Press the shutter button all the way down to shoot. Three consecutive images will be captured each time you press the shutter button.

NOTE

If exposure compensation is already in use, the value specified for that function is treated as the standard exposure level for this function.
You can also adjust exposure compensation by turning the exposure compensation dial in step 5.