Connecting to a Printer and Printing Via a Wireless LAN (Wi-Fi) (EOS M50)

Update Terakhir : 28-Feb-2018
Nomor isu : 8203890100

Solusi

Connect the camera to a printer via Wi-Fi to print as follows.

These steps show how to use the camera as an access point, but you can also use an existing access point.

Preparing the Camera

1. Turn the camera on.

2. Press the

button.

If the wireless settings screen is not displayed initially when you press the button, press the button again.

3. Choose [Enable] and press the

button.

4. A message about nicknames is displayed.

Press the button and check the nickname (camera name).

5. After checking, return to the function settings menu: MENU button.

REFERENCE

Nicknames are 1 – 8 characters and can be changed later.

6. Choose [OK] and press the

button.

7. Press the MENU button.

Return to the function settings menu.

NOTE

Wi-Fi and Bluetooth signal transmission can be turned off as follows.

　- Wi-Fi: Press the MENU button and choose [

] -> [

] -> [Wireless communication settings] -> [Wi-Fi settings] -> [Wi-Fi] -> [Disable].

　- Bluetooth: Press the MENU button and choose [

] -> [

] -> [Wireless communication settings] -> [Bluetooth function] -> [Bluetooth function] -> [Disable].

Printing Wirelessly from Printers Connected via Wi-Fi

1. With the camera on, press the

button.

If the wireless settings screen is not displayed initially when you press the button, press the button again.

2. Choose [

].

3. Choose [Register a device for connection] and press the

button.

4. Check the SSID (

) and password (

).

The SSID ends with _Canon0A.

5. Use the printer to connect to the camera via Wi-Fi.

In the printer's Wi-Fi setting menu, choose the SSID (network name) displayed on the camera to establish a connection.
In the password field on the printer, enter the password displayed on the camera.

6. Choose the printer to use and press the

button.

Images on the memory card are displayed after the devices are connected via Wi-Fi.

7. Choose an image and press the

button.

8. Choose [Print image], and then press the

button.

9. Print the image.

Choose [Print] and press the button.
Printing now begins.
To print other images, after printing is finished, repeat this procedure from step 7.

On-Screen Keyboard

Use the on-screen keyboard to enter wireless settings and other information.

Note that the length and type of information you can enter varies depending on the function you are using.

	•Entering characters Touch a character to enter it.
	•Moving the cursor Touch / .
	•Switching input modes : Switch to uppercase. : Switch to numbers or symbols.
	•Deleting characters Touch .
	•Entering line breaks Touch .
	•Confirming input Touch .

REFERENCE

Returning to the previous screen